Search found 1200 matches

by PoorMtnKid
15 Oct 2018 16:15
Forum: Engine Swap
Topic: SR20DET Oil Pump Priming
Replies: 10
Views: 282

Re: SR20DET Oil Pump Priming

Latest update. I took off the pan to inspect the pick up tube for cracks, it looked good but the o ring was obvious it was never replaced. I have ordered the later model sr pick up while I'm in here. The plan at this point is to put the later style in, bolt back up and try again using the drill pump...
by PoorMtnKid
10 Oct 2018 18:06
Forum: Engine Swap
Topic: SR20DET Oil Pump Priming
Replies: 10
Views: 282

Re: SR20DET Oil Pump Priming

No luck =( I tried this method and was able to get oil coming out of the camshaft oilers, turned the car over and still get no pressure. During the replacement of the oil pump what could go wrong, missing, incorrect , etc. to cause this problem? On thing I read is there is an O-ring that if missing ...
by PoorMtnKid
09 Oct 2018 11:42
Forum: Engine Swap
Topic: SR20DET Oil Pump Priming
Replies: 10
Views: 282

Re: SR20DET Oil Pump Priming

Hey Michael Thanks for the suggestion, I was able to come up with a plan. So I have a oil cooler adapter block similar to this already that runs to my oil cooler, I was able to source an AN fitting that can connect to the end of the IN line and I was able to pick up some tube and a drill pump. I'm g...
by PoorMtnKid
08 Oct 2018 11:23
Forum: Engine Swap
Topic: SR20DET Oil Pump Priming
Replies: 10
Views: 282

Re: SR20DET Oil Pump Priming

I built a tank that holds 1 gallon of oil. The tank has a line off the bottom I screw into the oil pressure sending unit hole in the block. The tank has an air supply line at the top with a valve, I hook my air compressor up to it and pressurize the tank. Some engines you can see oil start to pool ...
by PoorMtnKid
08 Oct 2018 07:49
Forum: Engine Swap
Topic: SR20DET Oil Pump Priming
Replies: 10
Views: 282

Re: SR20DET Oil Pump Priming

When I blow through one hose I can hear it blowing bubbles in the pan. Just checking, are you pulling oil from the pan - cooler - pump - Filter => engine? Or is the oil going from the pan - pump - cooler - filter => engine? Just clarifying. Byron I was trying to research that also on the SR20's but...
by PoorMtnKid
07 Oct 2018 19:52
Forum: Engine Swap
Topic: SR20DET Oil Pump Priming
Replies: 10
Views: 282

SR20DET Oil Pump Priming

Back in April I took my engine to a local machine shop for a full rebuild. Just this weekend I fired the engine for the first time but I'm not getting any oil pressure throughout the system. I have tried to search the typical SR forums about priming the pump and most lead to just removing spark/fuel...
by PoorMtnKid
23 Sep 2018 07:58
Forum: Featured Project Builds
Topic: My Coupe Project, back to the future.....
Replies: 2025
Views: 162982

Re: My Coupe Project, back to the future.....

Wow what value for the money. Cant wait to see this barn in the future
by PoorMtnKid
21 Sep 2018 19:36
Forum: Project Builds
Topic: New swap-4G63T
Replies: 150
Views: 30327

Re: New swap-4G63T

I had the same issues with my 300zx mod now sealing. I eventually had a shop here in town build a new tank with a sump and an external pump. When I had the 300 with stock tank I had huge starvation issues at half tank while at the track on long left hand turns. So it was either that or have fuel spi...
by PoorMtnKid
13 Aug 2018 21:21
Forum: Classifieds
Topic: FS: 1973 2dr 510 w/ 68/69 roller
Replies: 8
Views: 1171

Re: FS: 1973 2dr 510 w/ 68/69 roller

spriso wrote:
12 Aug 2018 14:24
can we see more hi res images of the roller? I followed the Photobucket link and it was a smaller shot...
Call or text my uncle Tony, I do not have any more pictures than what is here. He can send you more.
by PoorMtnKid
24 Jul 2018 10:12
Forum: Classifieds
Topic: FS: 1973 2dr 510 w/ 68/69 roller
Replies: 8
Views: 1171

Re: FS: 1973 2dr 510 w/ 68/69 roller

Here is the other side

Image

Price was in the first post, last sentence.
by PoorMtnKid
23 Jul 2018 14:40
Forum: Classifieds
Topic: FS: 1973 2dr 510 w/ 68/69 roller
Replies: 8
Views: 1171

FS: 1973 2dr 510 w/ 68/69 roller

Hey Everyone My uncle is looking to sell his 510's, the catch is you have to get everything and he will not part the two out. 1st we have a 73 if I remember correctly 2 dr 510 with L20b. He says when he got this motor it was hoped up with cam's and what not. I cannot say to what exactly but you can ...
by PoorMtnKid
21 Jun 2018 11:34
Forum: Body & Electrical
Topic: Stereo Options
Replies: 4
Views: 284

Re: Stereo Options

The Amp with aux cord sounds like a viable option. Amps now are smaller than before with good output, so easy to store out of sight. I di did find a Rockford fosgate system that does exactly what I want but its just under $200, I can pull off the amp trick cheaper I think. Not looking for some crazy...
by PoorMtnKid
18 Jun 2018 11:49
Forum: Body & Electrical
Topic: Stereo Options
Replies: 4
Views: 284

Stereo Options

Hello fellow members, Over the past years I have never had a stereo in the car and I'm ready for one. Trying to determine what options are best. Ideally I would love just a hidden receiver that I can Bluetooth into and control from my phone but I cant seem to find what I'm looking for. I was thinkin...
by PoorMtnKid
23 Apr 2018 14:33
Forum: General Discussion
Topic: JDM Legends
Replies: 26
Views: 1637

Re: JDM Legends

I have to disagree with most, I thought the show was good. I didn't watch the show to learn to be a better welder or a better car builder for that matter. I wanted to watch it because its breaking the norm of super clean garage that get things handed to them for free as a form of mass marketing thei...
by PoorMtnKid
30 Dec 2017 10:25
Forum: Featured Project Builds
Topic: Spriso's SR20DET Bluebird Coupe Project
Replies: 79
Views: 19911

Re: Spriso's SR20DET Bluebird Coupe Project

Just had the chance to sit hear and read a little my self. What an amazing build , detail is amazing. Feature?