Search found 5305 matches

by datzenmike
17 Feb 2018 20:47
Forum: Powertrain
Topic: Water flow through the L series heads
Replies: 6
Views: 97

Re: Water flow through the L series heads

http://www.the510realm.com/download/file.php?id=43783 Why are the outlet drains so high up when the combustion chambers are so much lower down? Why not copy the L16/18/L20B??? First thing that comes to mind on the L4 is the two openings for the warming/cooling of the intake manifold. I bet these mo...
by datzenmike
15 Feb 2018 20:08
Forum: Body & Electrical
Topic: bench testing alternators
Replies: 5
Views: 85

Re: bench testing alternators

Yes regulator.
by datzenmike
15 Feb 2018 17:33
Forum: Body & Electrical
Topic: bench testing alternators
Replies: 5
Views: 85

Re: bench testing alternators

I had a mounted electric motor and a volt gauge from a 720. I can't remember if I used a battery. (I don't think so...) I just held the alternator in hand with the belt loose around the pulleys. Pulled the alt. away from the electric motor to tension the belt, does not take much without any load, an...
by datzenmike
11 Feb 2018 20:36
Forum: Suspension
Topic: Suspension bodges
Replies: 4
Views: 115

Re: Suspension bodges

The one on the steering arm looks like wear from a loose bolt. You can see material pushed up around the top of the hole. I can't see the point in slotting one side of a part that attaches to another at fixed points. With the other bolt on it can't move in that direction. If both bolts were loose i...
by datzenmike
09 Feb 2018 14:42
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 594

Re: 200sx (S10) part out/sell as whole

If you complete your profile with a location, shipping costs would be easier to figure out.
by datzenmike
07 Feb 2018 19:31
Forum: Classifieds
Topic: WTB NapZ transmission
Replies: 5
Views: 200

Re: WTB NapZ transmission

The B is a great transmission and the later made the better as it did get some upgrades. It was used with 280zx non turbo so roughly 180 hp at the crank. The C would handle twice this safely.
by datzenmike
06 Feb 2018 21:27
Forum: Classifieds
Topic: WTB NapZ transmission
Replies: 5
Views: 200

Re: WTB NapZ transmission

Label is wrong. If it's an '81, then it's an FS5W71B. The earliest use of an FS5W71C was the '84 300zx non turbo and the C was never used in the 720. The B or C is the style of shifter that was used. Definitely made after '79.
by datzenmike
31 Jan 2018 19:00
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 594

Re: 200sx (S10) part out/sell as whole

Image


Went through my parts pile and I guess the rad in question IS from a 200sx but a later Z20E or Z22. Has the inlet over on the right side. Will try to fit it into my 710 but may not be room between the headlamps.
by datzenmike
30 Jan 2018 12:30
Forum: Powertrain
Topic: My L20B build, piston cam and other questions
Replies: 8
Views: 225

Re: My L20B build, piston cam and other questions

The original poster is using the old bore with a hone and new cast iron rings. Seems like a budget home made rebuild using stock parts. If L18 pistons are unavailable, then he will have to keep the L20B pistons. If all there is available is an open chamber head to work with then milling it and decki...
by datzenmike
29 Jan 2018 07:48
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 594

Re: 200sx (S10) part out/sell as whole

I know of one in east central Washington. I drop by to visit so will get a picture next Canby trip. There's also one in Penticton that's 'done up' and on the bottle. They definitely have a quirky look to them. It was the first 200sx but it came at the end of the 'coke bottle' era of styling like the...
by datzenmike
28 Jan 2018 17:50
Forum: Powertrain
Topic: Transmission dowel pins
Replies: 3
Views: 96

Re: Transmission dowel pins

Image

The one on the left is likely JDM and has a waffle pattern. Has a CAS mounted in the top of the bell reading the starter ring teeth? Can't remember where I got the picture but can't find it on the KAs here at all. The right is the older style ribs.
by datzenmike
28 Jan 2018 15:19
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 594

Re: 200sx (S10) part out/sell as whole

Thanks man.

I have one, supposedly from an S-10 200sx but looks too wide and slightly taller but not by much.
by datzenmike
27 Jan 2018 22:18
Forum: Powertrain
Topic: Transmission dowel pins
Replies: 3
Views: 96

Re: Transmission dowel pins

No the lower driver's side are all the same L16/18 20B/Z20/22/24,CA18/20, SD22/25 and the KA. 11022-21000 Top ones are the same except possibly different material or something minor as indicated by the slightly different part number. 30412-H1000 or 30412-H1001. Never heard of a 71C not fitting a 71B...
by datzenmike
26 Jan 2018 19:11
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 594

Re: 200sx (S10) part out/sell as whole

Rad any good? and can you roughly measure the L&W? Or a picture?

Go to advanced search