Yes I know how that feels sometimes, I guess not having your car at home under your nose makes it harder to stay engaged!
Still reveling from the epic drive through the cascades! Crossing my fingers that my car will be ready for this summer.
Search found 127 matches
Got some time to do some more work this past weekend, sanded and cleaned off the surface rust primed and painted with weld through zinc primer on the areas that were to be plug welded (does not show in the photo but masked off the area that was to be welded and sprayed the center and demasked and zi...
Moving to the other side of the engine bay, going to remove the washer bottle bracket and weld up the hole for the side marker wiring. https://i.imgur.com/iB5ZkBy.jpg Bracket removed and spot welds ground down hole filled and welded for wiring. https://i.imgur.com/cQwl7dI.jpg Checked under the cente...
Heinrich wrote:i would definitely move the horns if i were you.
hiding wires looks good but i prefer neat wiring over hidden wiring.
Thanks Heinrich, I am torn how to go about hiding the wiring at this point I also like neat wiring in a loom look.
Got busy removing the drive line lowered engine and trans down onto a rolling cart, then lifted the car off the drive line with the cherry picker. Still possible with the struts still attached but engine cross member still attached to engine. (much more involved from when I installed it using a 2 po...
510rob wrote:gooned wrote:Man that floor is solid!
Keep it going...
memories --- maybe we should foolishly torch it in half?
Boy not sure what you are looking at??? Where is your build projects?
What do you have to offer? Other than negative comments?
Man that floor is solid! Keep it going... Thanks Jamie I appreciate your positive words, yes it is solid. I do think that this does have some good bones to work from, what I have seen on the Realm this is a normal amount of repair to the floor area. As we have cruised together to Knox I do think th...
Got it thanks used imgur, simple like it's competitor. Spent the last hour or so fixing links to my project build. now I just have to trace down where the other more recent pictures are!
Just spent a couple of hours fixing the broken links to all my photos, glad I only have 2 pages and not too many photos... Started the disassembly process as part of the winter project. Got new front fenders from Futofab wanted to see them mounted after a couple of hours working. https://i.imgur.com...
qwik510 wrote:You are half way there.
When you have a picture opened in Photobucket, copy the image code
and paste it in the text area of your post.
The image will show up there.
See example above.
Nice looking dime to start with.