Search found 922 matches

by funwithmonkeys
16 Feb 2018 19:36
Forum: Suspension
Topic: Autocross Alignment Specs
Replies: 14
Views: 153

Re: Autocross Alignment Specs

I had the same issue with my fenders. When I got the front end redone on my car after an accident I got them properly trimmed so they look almost stock but let the 205 tires clear with ample room for more caster. You can see them here in my build thread. http://the510realm.com/viewtopic.php?f=3&...
by funwithmonkeys
15 Feb 2018 15:25
Forum: Suspension
Topic: Autocross Alignment Specs
Replies: 14
Views: 153

Re: Autocross Alignment Specs

I have mine set close to the above but with more camber in the front. I have about 4 in the front and about 2 in the back. I run the same tires as Keith but I like a slightly lower tire pressure. 5.5 caster also. Coming out of corners you just have to let the wheel slide in your hand, you never have...
by funwithmonkeys
09 Feb 2018 16:58
Forum: General Discussion
Topic: Part Numbers
Replies: 131
Views: 25591

Re: Fidanza L16,18,20B Aluminum Flywheels with 200mm clutch

200 MM Fidanza aluminium flywheel for a 6 bolt l series crank (L20 TO Z24) fidanza #143121 for a 77-79 200sx with an L20b (use with roadster clutch and PP) OK, I needed to add a little revision to this previous post from only a few days ago :-) I've called Fidanza this past week as my shop mate nee...
by funwithmonkeys
03 Feb 2018 14:28
Forum: Project Builds
Topic: The Red Baron
Replies: 98
Views: 9337

Re: The Red Baron

I know I asked Andy about mine running at 10 up to about 5000 and getting to low 11's at 7 to 8000. I asked if we should lean it out and make some more power.....he said sure we could do that but do you want to blow it up? I know Robello knows what they are doing. I quess it is just a difference in ...
by funwithmonkeys
02 Feb 2018 08:18
Forum: Project Builds
Topic: The Red Baron
Replies: 98
Views: 9337

Re: The Red Baron

That is really impressive. It will be interesting to see what your drivetrain loss is. What compression is it? With 10.5:1 mine will run 94 octane or 91 with a bit of octane booster.
by funwithmonkeys
31 Jan 2018 20:07
Forum: Project Builds
Topic: 2.3L of fun
Replies: 661
Views: 42273

Re: 2.3L of fun

I have been trying to keep it as light as I could. After a couple of long drives this year I decided it was time for something. The sludge is 8lb per gallon bucket when dry. I think I will used the full 2 gallons that I have. Right now it has 1.5 gallons down. Putting down just 1 gallon would be eno...
by funwithmonkeys
31 Jan 2018 19:28
Forum: Project Builds
Topic: 2.3L of fun
Replies: 661
Views: 42273

Re: 2.3L of fun

I have put on quite a bit of the Spectrum Sludge now and it makes a huge difference. Tapping on anything just results in a dull thud. It would be a nicer finish if you used the spray on one but that was not really an option. You can see the brush strokes on it as I did it. I may try to add another l...
by funwithmonkeys
30 Jan 2018 19:42
Forum: Project Builds
Topic: The Red Baron
Replies: 98
Views: 9337

Re: The Red Baron

Nice, I'm looking forward to seeing what your motor makes. It looks like it is almost the same as what I have.
by funwithmonkeys
30 Jan 2018 10:46
Forum: General Discussion
Topic: Interesting ebay Finds
Replies: 918
Views: 79194

Re: Interesting ebay Finds

https://www.ebay.ca/itm/DBC-BR42001-K-C ... NA&vxp=mtr

Anyone want some $8000 rotors and pads?
by funwithmonkeys
29 Jan 2018 07:26
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 583

Re: 200sx (S10) part out/sell as whole

I think that would be something really great to save also. Maybe in a couple of years I will be able to take one on. It would be fun to do an electric conversion on one.
by funwithmonkeys
26 Jan 2018 08:17
Forum: Events
Topic: 2018 Canby show, June 8,9&10th, Clackamas county fairgrounds
Replies: 3
Views: 164

Re: 2018 Canby show, June 8,9&10th, Clackamas county fairgrounds

I was disappointed to miss the show last year. I am going to make plans to get out to it this year for sure.
by funwithmonkeys
25 Jan 2018 13:35
Forum: Classifieds
Topic: WTB: 15 inch Watanabe wheels or look like
Replies: 18
Views: 1607

Re: WTB: 15 inch Watanabe wheels or look like

Colbino wrote:They do come it black now!

http://www.thezstore.com/page/TZS/PROD/ ... 1a/25-1210

Wow those are pretty pricey. $479 per wheel. I paid $160USD for mine and they made them to my specs.
by funwithmonkeys
25 Jan 2018 08:28
Forum: Introductions
Topic: Soon to be new 510 owner
Replies: 13
Views: 388

Re: Soon to be new 510 owner

I had a violent shake in the steering wheel under braking when my A050's were new. I adjusted the steering box and it made no difference. They had a massive amount of grip and extremely hard sidewall. The rubber bushing in my idler arm was toasted and I had a bad wheel bearing. Together with the gri...
by funwithmonkeys
23 Jan 2018 10:10
Forum: Introductions
Topic: Soon to be new 510 owner
Replies: 13
Views: 388

Re: Soon to be new 510 owner

That is pretty nice looking. It does look like at least one of the bolts holding the diff in are loose. You'd want to get those tight as soon as possible.

Go to advanced search