The 510 Realm

I have a set of a 72 wagon, what are the worth?

Would you take $50 and ship to Arizona

I got mine from RoakAuto, delivered to my front door for $240

Just saw on MotorWeek, JDM is selling Japanese Classics @ http://www.japaneseclassicsllc.com/ so we can all add a Skyline or JTS to our collections. They are also trying to offer the parts.

I think you are running out of fuel due to the size of your float bowels and hole in your needle and seats. I think your needle and seats are 1.5 or 1.7's, some of the 210's used a 2.5 witch worked with a radical tweak of the float. Your choke won't work if you are running out of gas. To check this ...

I just built me a 44" brake out of scrap steel I had laying around with the help of U-Tube and a couple Z24 valve springs I had. My local steel shop has a 8' brake for the big stuff. My total cost $14

Vary cool indeed

Thanks for the correction Byron510, the L20 uses a 114 link chain and the other L's use an 110 link, but my point was the oil filter.

The L28 and L20 chains are the same, there are two problems to cause chain ware: 1st is not using a made in Japan oil filter, all others drain back into the pan overnight and you have to reprime the oil circuit, this is because the filter is horizontal, if you can point it down a little this does no...

I found 1 bad coil in 40 years of working on Datsuns and it was because they mounted it nose down and the oil ran out. Datsun coils made about 48 KV about 10 more than any other you could buy. If it's bad I bet it's not OEM

I have 1, how good are your taillights?

Did any one see the 1975 – 78 Datsun Buyer’s Guide: In May 2015 issue of Hemmings? What To Pay Low Average High Coup 1975 $5,100 $11,100 $21,600 1976 $4,475 $9,700 $20,000 1977 $4,575 $9,900 $19,400 1978 $4,575 $9,900 $19,400 2+2 1975 $4,675 $10,600 $21,500 1976 $4,250 $9,200 $19,700 1977 $4,225 $9,...

Where should I post picks of past projects?

Hello, my name is John Tharp, Once upon a time; I was working at a VW Dealership in 1969 when I saw a 240Z drive by so I walked over to the Datsun Dealership on my lunch hour and got a job with them. At the end of the day I pushed my tools down the sidewalk to the Datsun Dealer to start my new job t...