The 510 Realm

Are you going to buy them?

Ok its garage clean out time. I have 2 R180 diffs both are OPEN diffs and Both have 3.90 gear sets. One is rebuilt and used for a year or so in my Z. The other is not rebuilt but a good runner no excessive backlash, noise, or play, but could use some seals. Looking for $120 for the rebuilt one and $...

Hey all! Unfortunatly my RB-Z is still layed up after last years engine failiure would i be able to catch a ride with one of you this year?

Personally I would start looking at the fuse/relay box under the hood for any cracked/broken/corroded wires and check your connections at the ECM, as well as the associated relays and fuses. I had a similar issue on a newer model nissan maxima. Turned out to be a combination of a corroded ground wir...

6 Key points to remember when doing an engine swap. (this applies to ANY VEHICAL)
1. Research.
2. Research.
3. Research.
4. Make a budget, and then double it.
5. If it looks suspect, replace it.
6. Research some more.

Lets just say i need a new oil pump amongst other things...

Well, for the short part of it that I was on it was a great cruise!

The Z is ready to go any time before the end of next week. It's time for more upgrades.

I'm in. The Z is all fueled up and ready to go.

Car has been SOLD.

PM's sent

It's all good ice. You are right denni i should have mentioned that earlier. Now that everybody knows what potential the car has, who wants to buy it?

12.9 was with the boost turned up to 17 PSI and on drag slicks wanna see the time sheet? I have the boost turned down to 5 psi so that any person can still enjoy it with reliability on lower octane fuel. Also, are you interested in buying the car? If not, then please start a new thread in another ca...

This is franks old car, but with alot of new parts and alot of tuneing done to it.

I haven't dynoed it, but it runs low 13's - high 12's consistantly in the 1/4 mile. I'm sorry to let it go, but i don't want to see it sit outside all winter and get rusty.

EDIT: THE above 1/4 mile times were with the boost truned up to 17 PSI with drag SLICKS.