Search found 15 matches

by 510racer28
29 Oct 2016 08:35
Forum: Classifieds
Topic: Koni shocks, GC plates, track steering parts
Replies: 10
Views: 1431

Re: Koni shocks, GC plates, track steering parts

Looking at the spring rates, these came off a race car right? How old are the shocks?
by 510racer28
30 Jan 2016 08:38
Forum: Classifieds
Topic: Wanted: Mikuni short length side draft manifold
Replies: 10
Views: 1464

Re: Wanted: Mikuni short length side draft manifold

I have a short Mikuni manifold with a nice patina (small engine fire). How long is your manifold from face to face?
by 510racer28
09 Jan 2016 08:31
Forum: Powertrain
Topic: Source for pistons (was L16 w/flat tops and open-chamber A87? )
Replies: 13
Views: 4790

Re: Source for pistons (was L16 w/flat tops and open-chamber A87? )

datzenmike, trust me they are 38.8mm. I used these on an L16 with L18 head (open chamber) to increase compression. Like the L16, the L24 had various combustion chamber designs through the years. I'm guessing NISSAN came up with these for the later Z with open chamber heads. I have L16 heads (210 cas...
by 510racer28
25 Dec 2015 13:44
Forum: Powertrain
Topic: Source for pistons (was L16 w/flat tops and open-chamber A87? )
Replies: 13
Views: 4790

Re: Source for pistons (was L16 w/flat tops and open-chamber A87? )

Those appear to be 73 Z-car pistons. Check the pin height, Nissan had a version of these pistons (12010-H2716) with valve reliefs that had a 38.8mm pin height if you want more compression. They are still available on-line
by 510racer28
07 Jun 2015 08:45
Forum: Classifieds
Topic: WTB Velocity Stacks
Replies: 6
Views: 1366

Re: WTB Velocity Stacks

Just bought some 1" stacks from Todd at Wolf Creek last week.
by 510racer28
04 Apr 2015 19:42
Forum: Powertrain
Topic: L16 pistons???
Replies: 4
Views: 1195

Re: L16 pistons???

Those are 73 L16 pistons. The 73 head had a larger combustion chamber so the dish on the 73 pistons was smaller. The 73 Z pistons were flat tops with valve reliefs like these. I'm interested in the 73 head if you have it for an experiment. Thanks
by 510racer28
21 Sep 2014 11:02
Forum: Suspension
Topic: JFZ Brakes on 510 strut / hubs
Replies: 10
Views: 3103

Re: JFZ Brakes on 510 strut / hubs

I'm in the process of restoring an old GT4 510 with JFZ brakes on the stock 510 struts. Unfortunately the car is in FL at the body shop and I'm in AL. I'll be picking it up later this year and can send some pictures.
by 510racer28
16 Aug 2014 20:27
Forum: Classifieds
Topic: WTS Fresh Built L16 with Clean 4spd Trans
Replies: 7
Views: 1331

Re: WTS Fresh Built L16 with Clean 4spd Trans

didn't you have some 13x7 revolutions? Send me a PM.
by 510racer28
24 May 2014 07:26
Forum: Classifieds
Topic: Mikuni 44 carbs
Replies: 1
Views: 525

Re: SK Racing Carbs 44mm (Mikuni)

PM sent
by 510racer28
21 Feb 2014 16:17
Forum: Classifieds
Topic: WTB: 275# coilover springs [BC/WA] - FOUND
Replies: 9
Views: 1102

Re: WTB: 275# coilover springs [BC/WA]

I have two sets of 275 lb springs. One set is blue, the other Eibach red. Both are 8" long. text me at two five six, 658, nine seven three eight.
by 510racer28
16 Aug 2013 16:45
Forum: Classifieds
Topic: Performance l20 lower end, limited slip differential, etc
Replies: 10
Views: 2000

Re: Performance l20 lower end, limited slip differential, et

I have several 4.11 diffs but i need a 4.38 or 4.44, etc

Thanks
by 510racer28
15 Dec 2012 09:42
Forum: Project Builds
Topic: Big Time Motors 510 new project clean up
Replies: 25
Views: 3828

Re: Big Time Motors 510 new project clean up

I think I have the sister car to this one. And it's painted over a yellow car also.
by 510racer28
04 Jul 2008 06:32
Forum: Classifieds
Topic: Used Adjustable Rear Sway Bar, Shocks; Chrome Cowl and Trim
Replies: 5
Views: 672

Re: Used Adjustable Rear Sway Bar, Shocks; Chrome Cowl and Trim

I'll take the rear sway bar if you still have it. Let me know how you want to ship and pay.

Thx!
D