The 510 Realm

Just wanted to give an update. After replacing just about everything including the computer the car still would not start. What I did try was to manually ground each fuel injector and guess what? It started. All I can think of is that it needed priming??? Doesn't make a lot of sense to me but it was...

Icehouse, noooo that's not what I wanted to hear. The distributer was remanufactured and purchased from O'reilly auto parts. I'm assuming that it's good. Don't know about the computer as it was used.

Update.. So the computer came early and had no changes to anything. UGGG!! What exactly is the CAS that you have mentioned? From what I've read it's a crank angle sensor on the bell housing. I cant see anything there. Are all the transmissions the same? I'm running out of things to check.

Update: So I checked and double checked all the grounds and the wiring from the injectors to the ECU. I went ahead and replaced the distributor and camshaft position sensor. Still no flashing lights with the Noid lights. Thinking the only thing left it could be is its an ECU issue. I ordered one and...

Update, So I drained the tank and put in new gas. Not that the gas was old but to eliminate it being a problem. I then went and bought a Noid Light to test injector wiring. Guess what? The lights aren't blinking when I turn it over??? Injectors are new and when I turn the key to on position they are...

It shouldn't be bad gas but i'll drain the tank and refill (can't hurt and i'm at a loss) I tried starting with it floored and still nothing. I appreciate your thoughts!!

Gas is new, I've been driving it for two years.

I will take a look. Thanks for the suggestion.

I have been driving this 73 510 with a KA24DE for two years and now all of a sudden it won't start. If I spray brake cleaner into the intake it will fire up till it runs out of the cleaner. It seems like a fuel problem but a ton of gas comes out when I turn it on and it does return to the tank. I di...

Hi everyone, I am looking for the driver side and passenger side window trim for my 2 door. I'll be at the Eagle Rock swap meet sunday or I don't mind paying for shipping. It's the trim http://the510realm.com/download/file.ph ... w&id=47495 that holds the outer squeegees. Thanks!

Thanks everyone! I was able to find some at dapsupply.net !!

I'm in Santa Clarita

Looking for a set of outer window squeegees for a two door 510. Anyone have an extra set or could recommend a place to purchase them. I'm in so-cal area.
Thanks,
William

Just wanted to thank you all who responded to my quest! A big shout out to Steve, He was terrific on the whole transaction! Thanks again, everything was perfect!
Sincerely,
William

Thanks Steve! I'm sending you a Pm.