Search found 1137 matches

by Three B's Racing
12 Jun 2018 05:49
Forum: Project Builds
Topic: Noobie's 510 project
Replies: 310
Views: 44327

Re: A clearer picture of my wheel bearing issues

Pulled everything apart this evening. Spacer is 'B'. WheelBearing_Spacer.jpg No way my micrometer can fit to measure the distance, nor could I spot a stamping on the trailing arm. RearPassengerTrailArm.jpg As before the inner bearing (SKF 6202-2RS1) popped out very easy. The outer bearing however n...
by Three B's Racing
11 Jun 2018 05:16
Forum: Body & Electrical
Topic: Headliner install
Replies: 4
Views: 134

Re: Headliner install

Ice cream sticks? That's a great idea. I used my old removed pinch weld door stripping cut in 4" lengths and simply pushed it up on around the material and clamps where needed but unlike you, I glued on both sides of the pinch weld and wrapped the headliner material up and around to the outside just...
by Three B's Racing
08 Jun 2018 04:52
Forum: Project Builds
Topic: Noobie's 510 project
Replies: 310
Views: 44327

Re: Noobie's 510 project

Thanks to everyone for the information. Most helpful. New parts arrive this wknd and then I'll dive in and confirm the spacer letter and see if the new SKF bearings have a more snug fit. Andrew, last year's bearing was on the driver's side. It's since been good once replaced and I followed Realm re...
by Three B's Racing
06 Jun 2018 04:51
Forum: Project Builds
Topic: Noobie's 510 project
Replies: 310
Views: 44327

Re: Noobie's 510 project

You know, if it's a tap fit at all, it's enough to make sure the bearing is centered in the housing - which is all that's needed. When installed the bearing is torqued down against the shoulders on either side on the outer race, and the matching spacer (A,B,C) ensures that the inner races have the ...
by Three B's Racing
05 Jun 2018 06:46
Forum: Project Builds
Topic: Noobie's 510 project
Replies: 310
Views: 44327

Re: Quick update

Thanks for the suggestions. If it slides out of the swing arm easily? it's possible the bearings OD is incorrect. Easy enough that a light tap knocks it out - a far cry from the original process of bearing puller etc... I don't think it's the OD sizing because I've sampled old bearings and they too...
by Three B's Racing
05 Jun 2018 06:22
Forum: Powertrain
Topic: Transmission Mount Question
Replies: 4
Views: 147

Re: Transmission Mount Question

Beev wrote:
04 Jun 2018 21:47
Thanks! I think I have it all sorted now. Just need to find the correct bolts in the bin of all bolts...
Wouldn't the bolts from the auto trans isolator work if you have them?
by Three B's Racing
05 Jun 2018 06:18
Forum: Classifieds
Topic: WTB - PL510 parking brake cable
Replies: 3
Views: 202

Re: WTB - PL510 parking brake cable

DADZSUN wrote:
04 Jun 2018 04:13
I'm looking for a parking brake cable/housing.

Basically the entire unit that connects to the under-dash lever, through the firewall, and down along the transmission tunnel to the swing arm.

Thanks!
I have a pair of cables from the crossmember to the wheel cylinders.
by Three B's Racing
05 Jun 2018 06:02
Forum: Events
Topic: 2018 Canby show, June 8,9&10th, Clackamas county fairgrounds
Replies: 36
Views: 2559

Re: 2018 Canby show, June 8,9&10th, Clackamas county fairgrounds

I see that has now been forecast, rain through the whole corridor from Vancouver to Canby, Friday, Sat and Sunday. No interest in going if raining, not going to risk my car on I-5 with race tires on, let alone slime city for 12+ hours. Puta! :lol: just kidding. Hell I drove from NH along with Kenny...
by Three B's Racing
04 Jun 2018 07:21
Forum: Project Builds
Topic: Noobie's 510 project
Replies: 310
Views: 44327

Re: Quick update

I had a nice weekend with my pup & MTB in the 510. I'm still having issues with my rear right wheel bearing. I've replaced it twice now and am nervous the bearing housing is compromised - the inner bearing pops out almost too easy. :shock: :? I've ordered new bearings, locknut, and rotors. I'll try...
by Three B's Racing
04 Jun 2018 05:24
Forum: Suspension
Topic: Front sway bar options and issues
Replies: 17
Views: 993

Re: Front sway bar options and issues

Wow!!! when you modify a car as we do for different engine applications SR/KA/VG/FJ/FC and expect perfect fitment of aftermarket parts, then definetely experience is not in your resume. I call BS ON THIS STATEMENT "just about everyone he know who has used the Futofab bar has swapped it for his" Real...
by Three B's Racing
29 May 2018 07:01
Forum: Not Datsun/Nissan related?
Topic: Memorial Day
Replies: 2
Views: 120

Re: Memorial Day

I don't particularly like how you put this out, it's like a scolding. I don't believe any of us need a remind. I'll be BBQ, BEERS and Swimming with my two Veterans and father in law who served in WWII thank you very much and always, not just Memorial Day, remember the fallen.
by Three B's Racing
29 May 2018 06:36
Forum: Body & Electrical
Topic: Pilkington Windshields - Easy and new Availability
Replies: 6
Views: 294

Re: Pilkington Windshields - Easy and new Availability

Though is says shipping is free, it also says does not exclude shipping freight cost and over sized cargo cost. Anyone know what those cost could be? because I'd hate to order one then get a $200 cargo/freight charge.
by Three B's Racing
24 May 2018 05:16
Forum: Powertrain
Topic: 5 speed hole cutting!
Replies: 10
Views: 298

Re: 5 speed hole cutting!

What I would do is install the manual trans then with a long rod and hammer dimple the location of the shifter from underneath.
by Three B's Racing
24 May 2018 05:13
Forum: Powertrain
Topic: 5 speed hole cutting!
Replies: 10
Views: 298

Re: 5 speed hole cutting!

From what I recall, the SR cut away will be over kill for what the ZX needs. I went from the ZX to the KA box (same as SR) and had to do more to make it fit. Try over on Ratsun if you have searched here thoroughly. What I sent wasn't intended to be cut for an SR trans because he's not using an SR t...
by Three B's Racing
23 May 2018 05:11
Forum: Powertrain
Topic: 240MM clutch experience
Replies: 10
Views: 369

Re: 240MM clutch experience

That's awesome as I've never seen a Fidanza structured like that Nice!!