Search found 5343 matches

by datzenmike
31 Jan 2018 19:00
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 1041

Re: 200sx (S10) part out/sell as whole

Image


Went through my parts pile and I guess the rad in question IS from a 200sx but a later Z20E or Z22. Has the inlet over on the right side. Will try to fit it into my 710 but may not be room between the headlamps.
by datzenmike
30 Jan 2018 12:30
Forum: Powertrain
Topic: My L20B build, piston cam and other questions
Replies: 8
Views: 608

Re: My L20B build, piston cam and other questions

The original poster is using the old bore with a hone and new cast iron rings. Seems like a budget home made rebuild using stock parts. If L18 pistons are unavailable, then he will have to keep the L20B pistons. If all there is available is an open chamber head to work with then milling it and decki...
by datzenmike
29 Jan 2018 07:48
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 1041

Re: 200sx (S10) part out/sell as whole

I know of one in east central Washington. I drop by to visit so will get a picture next Canby trip. There's also one in Penticton that's 'done up' and on the bottle. They definitely have a quirky look to them. It was the first 200sx but it came at the end of the 'coke bottle' era of styling like the...
by datzenmike
28 Jan 2018 17:50
Forum: Powertrain
Topic: Transmission dowel pins
Replies: 3
Views: 313

Re: Transmission dowel pins

Image

The one on the left is likely JDM and has a waffle pattern. Has a CAS mounted in the top of the bell reading the starter ring teeth? Can't remember where I got the picture but can't find it on the KAs here at all. The right is the older style ribs.
by datzenmike
28 Jan 2018 15:19
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 1041

Re: 200sx (S10) part out/sell as whole

Thanks man.

I have one, supposedly from an S-10 200sx but looks too wide and slightly taller but not by much.
by datzenmike
27 Jan 2018 22:18
Forum: Powertrain
Topic: Transmission dowel pins
Replies: 3
Views: 313

Re: Transmission dowel pins

No the lower driver's side are all the same L16/18 20B/Z20/22/24,CA18/20, SD22/25 and the KA. 11022-21000 Top ones are the same except possibly different material or something minor as indicated by the slightly different part number. 30412-H1000 or 30412-H1001. Never heard of a 71C not fitting a 71B...
by datzenmike
26 Jan 2018 19:11
Forum: Classifieds
Topic: 200sx (S10) part out/sell as whole
Replies: 13
Views: 1041

Re: 200sx (S10) part out/sell as whole

Rad any good? and can you roughly measure the L&W? Or a picture?
by datzenmike
26 Jan 2018 19:09
Forum: Classifieds
Topic: four L18 85mm bore pistons 4cc
Replies: 1
Views: 306

Re: four L18 85mm bore pistons 4cc

4.36cc
by datzenmike
26 Jan 2018 19:08
Forum: Powertrain
Topic: My L20B build, piston cam and other questions
Replies: 8
Views: 608

Re: My L20B build, piston cam and other questions

As the L20B piston does not reach the top of the block anyway, why not mill 0.5mm off the deck? This removes 2.8cc from the combustion chamber. Now mill the head 0.75mm for an additional 4.25cc removed. Use cam tower shims to keep the chain tight. This is 7cc or the same as running 4.36cc L18 piston...
by datzenmike
25 Jan 2018 06:50
Forum: Powertrain
Topic: A87 Camshaft identification request
Replies: 3
Views: 338

Re: A87 Camshaft identification request

A87 and L20B cams were essentially the same. Looks like the cam was reground. Hardly any shoulder left on it.
by datzenmike
22 Jan 2018 20:52
Forum: Powertrain
Topic: A87 Camshaft identification request
Replies: 3
Views: 338

Re: A87 Camshaft identification request

Etched into the back of the cam? Maybe a picture?

Usually the A87 was used on L18s and had an L20B cam. Does it have square protrusions at the halfway point?

Image
by datzenmike
21 Jan 2018 19:26
Forum: Classifieds
Topic: FS: 5 speed datsun transmission - SOLD
Replies: 6
Views: 572

Re: Selling 5 speed datsun transmission

Yes starting in '80 all 71B 5 speeds were equipped with a reverse check sleeve that blocks a straight downshift from 5th into reverse. A handy little addition. I have a '79 280zx 5 speed in my 710 and put the rear case from an '85 Diesel on it. Mostly for the shorter shift throw it provided but the ...
by datzenmike
21 Jan 2018 11:08
Forum: Classifieds
Topic: FS: 5 speed datsun transmission - SOLD
Replies: 6
Views: 572

Re: Selling 5 speed datsun transmission

Well it may be as there was no difference between the z and the '79 only zx. All '80 and up zx, 810, Maxima 71Bs had small changes on the outside that this one does not have.
by datzenmike
20 Jan 2018 19:37
Forum: Classifieds
Topic: FS: 5 speed datsun transmission - SOLD
Replies: 6
Views: 572

Re: Selling 5 speed datsun transmission

Can only be a '77-'78 if it's a 280z and only a '79 if it's a 280zx. This one was made before '80. It also only has the reverse light switch so most likely an EFI car like a z, zx or 810. And it has a car slave cylinder on it. The 620 had same 71B transmission, but several more emission related swit...