Search found 11990 matches
- 23 Apr 2006 11:30
- Forum: Technical - Archive
- Topic: What spark plugs to use?
- Replies: 21
- Views: 5742
RE: Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: Stock Plugs?
And,,,we are going to get your mother in-law out on the club drives. Tell her to bump the tire pressure up a bit!
- 23 Apr 2006 08:31
- Forum: Technical - Archive
- Topic: stock driveline
- Replies: 37
- Views: 6280
RE: Re: RE: stock driveline
So, did they get the diff in? It is so nice out today, I wish I had mine running.
- 22 Apr 2006 15:43
- Forum: Technical - Archive
- Topic: What spark plugs to use?
- Replies: 21
- Views: 5742
RE: Re: RE: Re: RE: Re: RE: Re: RE: Stock Plugs?
My comments before hold for you too. Do a plug check, and see how the colour is. I would think you should be ok with the 6's, but, as the summer heats up, and you may be driving harder, or, if your going to cruise to Vancover on the Coke, maybe throw some 7's in. With that being said, what is the co...
- 22 Apr 2006 10:44
- Forum: Technical - Archive
- Topic: Bump Steer Spacers
- Replies: 4
- Views: 1082
RE: Bump Steer Spacers
The bolt bin?!
- 22 Apr 2006 08:24
- Forum: Technical - Archive
- Topic: WIDE BAND O2
- Replies: 147
- Views: 27539
- 22 Apr 2006 07:36
- Forum: Technical - Archive
- Topic: stock driveline
- Replies: 37
- Views: 6280
RE: Re: RE: stock driveline
I would love to see James's face when he gets those gears in there. They will transform that car.
- 22 Apr 2006 06:42
- Forum: Technical - Archive
- Topic: stock driveline
- Replies: 37
- Views: 6280
RE: Re: RE: stock driveline
Yah! 1 week to go!
- 20 Apr 2006 06:42
- Forum: Technical - Archive
- Topic: Pulling clutch pilot bushing
- Replies: 10
- Views: 2127
RE: Pulling clutch pilot bushing
I guess I mean your clutch alignment tool, although, if your REAL GOOD, you could run at the crank with the transmission in hand!
- 20 Apr 2006 06:39
- Forum: Technical - Archive
- Topic: Heat Shields
- Replies: 11
- Views: 2258
- 20 Apr 2006 06:25
- Forum: Technical - Archive
- Topic: Pulling clutch pilot bushing
- Replies: 10
- Views: 2127
RE: Pulling clutch pilot bushing
The clearances on the pilot guide have to be pretty good, and the strike on the hammer has to be forcefull and quick. I have had 50/50 success with this. On one crank I had to carefulley cold chisel a grove into things, as it just would not come out. I had a roller bearing in there once, that I had ...
- 19 Apr 2006 22:06
- Forum: Technical - Archive
- Topic: Pulling clutch pilot bushing
- Replies: 10
- Views: 2127
RE: Pulling clutch pilot bushing
Pack the hole full of grease, then, take your pilot shaft and tap it in to the pilot bushing. It should hydraulic out just fine.
- 19 Apr 2006 22:04
- Forum: Technical - Archive
- Topic: Heat Shields
- Replies: 11
- Views: 2258
- 19 Apr 2006 17:57
- Forum: Technical - Archive
- Topic: What spark plugs to use?
- Replies: 21
- Views: 5742
RE: Re: RE: Re: RE: Re: RE: Re: RE: Stock Plugs?
Do you wear any sort of a neck brace for the acceleration?
- 19 Apr 2006 17:33
- Forum: Technical - Archive
- Topic: What spark plugs to use?
- Replies: 21
- Views: 5742
RE: Re: RE: Re: RE: Re: RE: Stock Plugs?
Baz wrote 1.1 MM....oh...you metric guys!
Jason, I think you are wise. Running "richer" is not good for power, unless you are too lean. Gas is 1.19 liter in Surrey ......I think I will solder all my jets up and see if I can get 40 MPG in the Datsun!!!
Jason, I think you are wise. Running "richer" is not good for power, unless you are too lean. Gas is 1.19 liter in Surrey ......I think I will solder all my jets up and see if I can get 40 MPG in the Datsun!!!
- 19 Apr 2006 17:26
- Forum: Technical - Archive
- Topic: Heat Shields
- Replies: 11
- Views: 2258
Ah, yes...the original question...funny how they get lost sometimes. I have a small tab that goes up from the heat shield, that bolts right onto a small, taped out hole in the bottom of my intake manifold. Then, on the far side, just above the waste gate, I have a small tab that goes down off the he...