The 510 Realm

Finally getting around to building this thread. Had one going in the Swap thread before photobucket went, and was straying a bit from the engine itself. After a few suggested comments Im starting fresh here--- stay tuned for updates as this is going to take a little while to work back through all th...

Welcome! another north east 510! Ive been a bit quiet on here for a little while but working back into things. We have an annual East Coast 510 meet. SPEC510. 3rd weekend in May at Summit Point Raceway. ... Lou in NH comes nearly every year. Maybe you can hook up with him. I'm sure he will chime in....

Went and saw this car today - Its pretty rough... Still thinking about it to grab some spares (x-members, diff, struts...) and part the rest. Spent most the afternoon trying to dig up some history on it, but havent been able to find anything. Looks like it was driven by Michael Katz, and did a numbe...

Can't speak for their xmember s either trans or front but I wouldn't waste your money on the engine mounts/isolators - I read it from a few people bought em anyway ... But not gonna use em... No good motor mounts or isolators for this swap which is surprising... Gotta go custom or make the tradition...

Didnt mean to go full MIA on this board - been super busy and the 510 has been on the back burner.

Anyway Bumping the thread.

Radiator, Heatshield, Plug wires, alt and starter are pending.

Make me an offer on anything else. Got a random assortment of stock KA24DE parts as well.

Alignment of the mounts was covered in my build thread here: http://www.the510realm.com/viewtopic.php?f=3&t=23691&start=60#p239454 Additional pictures are here: http://www.the510realm.com/viewtopic.php?f=3&t=23691&start=75#p241587 I eventually modified the passenger side mount to ra...

Looking good! I never bothered to balance my trigger-equipped crank pulley as I rarely hit 5K RPM - but it's a good investment regardless. Two thoughts: 1) My KA sat similar to yours (a little less rear offset due to keeping the cabin heating). However, at that height my OEM D21 exhaust manifold wa...

Sorry all- been busy .... lazy... and frustrated.... time for some more updates Distributor block off- Trigger wheel sensor Then came the fun.... Been around with the motor and trans mounts for more hours then Im willing to admit.... this is the most frustrating part... With the T3 trans mount forwa...

Well its in- But it didnt go willingly.... and Im not particularly happy with how its sitting... Pan and Pick-Up showed up - Big Shout out to Trophy24!!! and some nice looking work by Ray at Garage Autohero Spec Stage 1 Clutch and Fidenza LW Flywheel Putting up a good fight.... Got it in the car wit...

dat_sr510 wrote:Interested in the heat shield how much shipped to 90011

$35 - Can send it out Monday

Shoot me a pm or text if you want to snag it

SOLD Pair of Weber DCOM 40s - Pulled em when I went to Mikunis and discovered that one of the ears were broken... any way buy a carb, rebuild kits and horns and get a spare broken one. They were mated to an L20b with a hot cam... dont know what Jets. Has a couple spares, dont know the sizes though. ...

Send me a PM if your interested - can send more photos.

Text works well too - two zero three - nine eight four - nine seven zero six

Devon

510 center unit with Oil Pressure and Narrow band AFR gauge - both worked - have the sensor for the AFR but probably time for a new one - have the oil pressure sender too. $75 shipped http://i871.photobucket.com/albums/ab271/demo243/parts%20for%20sale%2011-27/E69878F7-17F4-47FB-8E84-946A52655C3C.jpg...

Got some left over L series parts from my old L20B Not looking to get rich... just trying to recoupe some costs on KA Build... and cover shipping cost. If your outside of the lower 48 I can check shipping quotes too Fan with pulley - $30 shipped http://i871.photobucket.com/albums/ab271/demo243/parts...

Did some work on the manifold - drilled and tapped the linkage mounts for the linkage I got from pierce


Not perfect... but close enough to work.


TPS Sensor Mocked up


Simple throttle cable bracket


Did some header bashing


Teaser shot of the pan - should be here wednesday or thursday