The 510 Realm

Where are you located...It would help if you updated your location in your profile...thanks

Thanks for all the suggestions. I was able to use a few pieces from Home Depot to get things tightened up for the time being. I'll snap a few photos in the morning and post

Looking for some advice on a direction to repair or modify issues with the shifter play on an A type 5spd box. A little history: At the end of last years racing season I purchased a close ratio comp box with the early A style shifter assembly. The assembly has been modified in such a way that the up...

Nice...have fun with the project!

Moved the racecar into the shop from its winter home in the trailer...time to get ready for the season...VIR and Summit Point right around the corner. Also replaced the bad clutch slave cylinder on the street car and took her for a drive...feels good to be back in the 510 after an extended winter sl...

Excellent Dave...might be another project in my future

excellent post....thanks

You'll be glad you did that...nasty in there!

Planning a carbed VG conversion and was wondering if anyone has experience using any of the older model or current model Electramotive ignition systems. If so what are your impressions.

Thanks

I'm currently building a set of ZX struts with the narrow 3.5" (Wilwood, Sierra, etc.) for the ice racer turning road racer. The bolt pattern is the same, but a few other things are hurdles that seem too big to make something easy to bolt on. What I've found so far: If the calliper bolted to t...

with the exception of the speedo. Speedo is mechanically driven and I haven’t yet devised a way to make the connection

a GPS electric speedo conversion would be an easy solution, but might be a little pricey. Just wouldn't work in tunnels

Will trade for a '49-'53 Chevy two-door, complete, running, registered, with good interior. Good paintwork not needed, but all chrome has to be there. May also trade for a C5 Vette roller (engine, electrics, fuel, exhaust, front/rear suspension, brakes, etc. - the whole thing separates from the Vet...

Now the front windshield needs addressing, bullet holes aren't my favorite. We've been thinking of making a lexan windshield, and 1/4 windows. I know it wouldn't be easy. There isn't too much of a bend in the windshield.. Curious if anyone around here has done anything of the sort? I had "Shiel...

Anybody?

Some pictures from my body shop guy...not the best