The 510 Realm

icehouse wrote:Just toss the box and install a rack.

I would if I KNEW I wouldn't have to modify my DP . Next time you are in Vegas give me a heads up and we can meet up so you can have a look .

Thanks Everyone. I will be going the brass route.

Just like the subject says, I need the plastic plug for the steering box . Any known replacements for this?

Thanks

Wow who's NSX? Always wanted one but them seem to continue to increase in value..... Would love to just drive one some day.

I want to see more of this train set up!

Thanks Heinrich, this helped me resolve the issue. I found a wire that had the volts during cranking and tied that plus my other wire to the same relay and viola !

Mods this can be deleted now.

icehouse wrote:Wait so did you try hook the suggested key power wire straight to the battery? Seems like you have it hooked to the wrong position on the ignition.

We did , it would start run for a few seconds and die.

Over the last year I've been helping a friend swap aVQ 35 HR into his 75 280Z. We purchased a wiring harness from a place called Z specialties that is basically a four wire hook up. At this point I am confident I have all the wiring done correctly but this is the problem we are having . To power the...

I have them installed in my 2 door. They are obviously going to be bigger than stock seats. I really cannot give much on the install because I already remove the factory mouting location before these went in from previous seats. THe only down side to the 350z seats is that thedriver seat inner rear ...

Hello fellow 510'ers and gear heds. My father is looking to part ways with his Fiat that he has owned for the last 3 1/2 years. Currently the car does start up, runs, and drives with no major issues. The car has the more sought after 1608 engine which is DOHC. Since he owned the car he has upgraded ...

I tried out their motor mounts and hated them. THey are way too stiff and all the engine vibrations came through . I used their Radiator and intercooler set up which was good . I also used the CX racing manifold that he sells on there and it was garbage.

THe best part of auto x is getting that slip and beating your previous best. Last month I went out and on my last run of the day I put down my best run!

I second going with the R180 out of the Subaru with the Beta Motorsports stub axles ( Sold by Futofab.com now right ? )

Hey Taco Man My uncle has one in Arizona (Kingman area ) that he is looking to sell. Its a 70 that is as stock as possible from a body stand point, does have an l20 that was running a few years back. Needs paint and interior but its been in Arizona for as long as I can remember , so like 20 plus yea...

Hey Tony

Good to see another Vegas person show up. Our last one recently moved to Austin TX. What side of town are you on?