The 510 Realm

I will stop at the auto parts tomorrow and see if I can find something close. I'll post pics and a part number if I find something, thanks.

i saw that post when I searched but mine does not look like that.

I need the long heater core hose that comes right off the heater core on the unit itself not the ones in the engine bay. My car is a 72 4 speed if that makes a difference. Anyone have a source for the hose or one that is close?

I'm looking for a few parts for my 72, I need

Wiper arms with mounting hardware
radio surround with ashtray
headlight knob

I'm missing the copper tab that attaches to the column and rides on the back side of the hub for the horn. I think the black//green stripe wire attaches to a spot and that is where the copper part attaches. Can I just make one from a copper strip? I have a momo hub and wheel that came with the car t...

So I have one datsun comp strut part number 54303 22030, it is just the strut by itself, no hub, caliper, shock insert. Is this worth anything? Should I try and track down the other side 54302 22030 so I have a set?

got it and I will be sending pictures shortly

I have a pair from a 79zx, if your interested let me know and I'll get pics

"You gotta remember a 510 is about 10x more money then it should be for what it is. "

I just bought my first 510 a few months ago and your statement is spot on.

RMS PM sent for TC rods. I think I'm going to leave the springs for now. They look like they are in good shape and I have them. I'm updating stuff that I don't have or need to replace. When I try and look up QA1 shocks they don't have a datsun nissan selection. What vehicle or part am I using for 51...

Thanks for the replys everyone. The plan for now is to use the 510 spring perch and springs on the 280zx strut with possibly upgrading to coils in the future if I need it. My struts had gas inserts so no chance on cutting one coil and adding the 20w oil, I need a replacement insert. The twin master ...

I should add that one of the other reason to switch was to gain the 3/4" offset back. I have nice almost new panasport wheels that came with the car. When I bolted one onto the 280zx strut the tire was almost touching the strut tube. My zx calipers are in good shape but they do need new pistons...

I'm putting a 1972 510 back together and I'm replacing almost all of the suspension and brake components. Some of the stuff is missing and the rest is worn out. I've been reading and searching to figure out what I want to do. My goal for the car is a L18 or L20B with side drafts and a dogleg 5 speed...

thanks for the part numbers, is there an online nissan dealer that you recommend to get these parts or do I just go to my local dealer?

Tim

thanks for the part numbers and the reply. Here is a picture of everything I received with my car that I think is for the transmission (not sure on the two rubber mounts). 20171126_082223_1511706498553_resized.jpg 20171126_082203_1511706499397_resized.jpg 20171126_082146_1511706497618_resized.jpg Im...