* Flame Suit On *
Sorry if this is an exhausted question. I searched but could not find links/part numbers for the front wheel bearings for the STOCK 510 front spindles.
I am looking for direction on where to source the Timken components for front wheel bearing replacement.
From my understanding, I am looking for the inner / outer bearings and races , The seals, and I believe the new Axle nut.
Any advice? Part numbers definitely appreciated.
Thanks,
Front Wheel Bearing Part Numbers for 510 Struts
- Boy Blunder
- Posts: 117
- Joined: 18 Oct 2012 18:02
- Location: Terre Haute, IN
-
- Supporter
- Posts: 6080
- Joined: 24 May 2006 12:40
- Location: Van. Isle.
Re: Front Wheel Bearing Part Numbers for 510 Struts
Grease seal.............................. 40232-21000 maybe $5?
Inner wheel bearing................. 40210-A0100 $30?
Outer wheel bearing................ 40215-21000 $15?
Washer..................................... 40264-A0800 $2
Loc-nut..................................... 40262-U0100 $5
Cotter pin................................. 00921-43010
Inner wheel bearing................. 40210-A0100 $30?
Outer wheel bearing................ 40215-21000 $15?
Washer..................................... 40264-A0800 $2
Loc-nut..................................... 40262-U0100 $5
Cotter pin................................. 00921-43010
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs
Re: Front Wheel Bearing Part Numbers for 510 Struts
Have you looked at RockAuto?
http://www.rockauto.com/catalog/x,carco ... ttype,1672
SKF is another good brand, but they also carry some Timken.
http://www.rockauto.com/catalog/x,carco ... ttype,1672
SKF is another good brand, but they also carry some Timken.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
- Boy Blunder
- Posts: 117
- Joined: 18 Oct 2012 18:02
- Location: Terre Haute, IN
Re: Front Wheel Bearing Part Numbers for 510 Struts
datzenmike wrote:Grease seal.............................. 40232-21000 maybe $5?
Inner wheel bearing................. 40210-A0100 $30?
Outer wheel bearing................ 40215-21000 $15?
Washer..................................... 40264-A0800 $2
Loc-nut..................................... 40262-U0100 $5
Cotter pin................................. 00921-43010
Mike,
Are these the Timken numbers or the Nissan P/N's?
- Dave Patten
- Supporter
- Posts: 838
- Joined: 20 Jun 2008 13:30
- Location: Dunbarton, NH
Re: Front Wheel Bearing Part Numbers for 510 Struts
Boy Blunder,
They look like Nissan numbers.
Wheel bearing manufacturers use a generic numbering system for inner race/bearing and outer race sets.
Here is info I've pulled together based on National #'s, but I believe Timken uses the same generic bearing number system.
Front Wheel Bearings, Datsun 510 – National #’s
• A4 inner - 1.0625”ID, 1.98” OD
• A1 outer - .6875” ID, 1.57” OD
• Seal #1183 – 2.175” OD, 1.693” shaft, .315” wide
They look like Nissan numbers.
Wheel bearing manufacturers use a generic numbering system for inner race/bearing and outer race sets.
Here is info I've pulled together based on National #'s, but I believe Timken uses the same generic bearing number system.
Front Wheel Bearings, Datsun 510 – National #’s
• A4 inner - 1.0625”ID, 1.98” OD
• A1 outer - .6875” ID, 1.57” OD
• Seal #1183 – 2.175” OD, 1.693” shaft, .315” wide