I'm missing the copper tab that attaches to the column and rides on the back side of the hub for the horn. I think the black//green stripe wire attaches to a spot and that is where the copper part attaches. Can I just make one from a copper strip? I have a momo hub and wheel that came with the car that I will be using. The hub has the brass ring and wire and I have a horn button.
I also am missing the nut to hold the hub on, anyone know the size off hand?
Steering column copper part and steering wheel hub nut
Steering column copper part and steering wheel hub nut
1972 4 door hopefully with a L20B and side drafts before to long
Re: Steering column copper part and steering wheel hub nut
Hub nut is M16 x 1.5.