Page 1 of 1

Steering column copper part and steering wheel hub nut

Posted: 10 Jan 2018 17:39
by obrut
I'm missing the copper tab that attaches to the column and rides on the back side of the hub for the horn. I think the black//green stripe wire attaches to a spot and that is where the copper part attaches. Can I just make one from a copper strip? I have a momo hub and wheel that came with the car that I will be using. The hub has the brass ring and wire and I have a horn button.

I also am missing the nut to hold the hub on, anyone know the size off hand?

Re: Steering column copper part and steering wheel hub nut

Posted: 27 Mar 2018 22:28
by Tedman
Hub nut is M16 x 1.5.