Wanted 5.1 crown wheel & pinion set for a R180 diff

Post your forsale and wanted ads
Post Reply
1600SSS72
Posts: 52
Joined: 15 Jan 2009 05:17
Location: Lisbon, Portugal

Wanted 5.1 crown wheel & pinion set for a R180 diff

Post by 1600SSS72 » 22 Apr 2018 02:29

I need a 5.1 (or 4.875) crown and pinion for a long nose R180 diff.
Last edited by 1600SSS72 on 23 Apr 2018 11:38, edited 1 time in total.

User avatar
funwithmonkeys
Supporter
Posts: 983
Joined: 05 Sep 2013 09:34
Location: Vancouver, BC

Re: Wanted 5.1 crown wheel & pinion set for a R180 diff

Post by funwithmonkeys » 22 Apr 2018 15:31

You should specify which internal diameter of the crown also. For the R180 there are 2. 110mm for the older Datsun stuff and the newer diffs with the K cast in the casing are 115mm. Just an FYI, I found out the hard way.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?

1600SSS72
Posts: 52
Joined: 15 Jan 2009 05:17
Location: Lisbon, Portugal

Re: Wanted 5.1 crown wheel & pinion set for a R180 diff

Post by 1600SSS72 » 23 Apr 2018 11:27

Thank you, I am using a Subaru WRX R180 4.44 lsd, but as it is mounted in car I cannot verify but I would appreciate if someone knows.

User avatar
funwithmonkeys
Supporter
Posts: 983
Joined: 05 Sep 2013 09:34
Location: Vancouver, BC

Re: Wanted 5.1 crown wheel & pinion set for a R180 diff

Post by funwithmonkeys » 23 Apr 2018 11:32

That will be a 115mm.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?

1600SSS72
Posts: 52
Joined: 15 Jan 2009 05:17
Location: Lisbon, Portugal

Re: Wanted 5.1 crown wheel & pinion set for a R180 diff

Post by 1600SSS72 » 23 Apr 2018 11:34

Thank you.

Post Reply