Wanted 5.1 crown wheel & pinion set for a R180 diff
Wanted 5.1 crown wheel & pinion set for a R180 diff
I need a 5.1 (or 4.875) crown and pinion for a long nose R180 diff.
Last edited by 1600SSS72 on 23 Apr 2018 11:38, edited 1 time in total.
-
funwithmonkeys
- Supporter
- Posts: 1336
- Joined: 05 Sep 2013 09:34
- Location: Vancouver, BC
Re: Wanted 5.1 crown wheel & pinion set for a R180 diff
You should specify which internal diameter of the crown also. For the R180 there are 2. 110mm for the older Datsun stuff and the newer diffs with the K cast in the casing are 115mm. Just an FYI, I found out the hard way.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?
Re: Wanted 5.1 crown wheel & pinion set for a R180 diff
Thank you, I am using a Subaru WRX R180 4.44 lsd, but as it is mounted in car I cannot verify but I would appreciate if someone knows.
-
funwithmonkeys
- Supporter
- Posts: 1336
- Joined: 05 Sep 2013 09:34
- Location: Vancouver, BC
Re: Wanted 5.1 crown wheel & pinion set for a R180 diff
That will be a 115mm.
If no one from the future comes back to stop you from doing it then how bad of a decision can it really be?