WTB. Front clip

[Gereed75]

Need a front clip A pillar forward to use for repair of my shunted race car. Will consider any location but prefer one located in eastern USA. Help me 510 Realm

[yenpit]

I have a near perfect 1971 (70-73) 510 Sedan front clip, completely stock & original, even still has the battery tray. I just cut the car apart, ready to put on a pallet & ship! It has never been hit on the corners or anywhere else, the upper & lower frame rails are excellent, the rad core support is excellent, the lower valence is decent but has some minor "bump" damage & one end the bolt holes/loops were ripped open, and there is MINOR rust starting where the bumper brackets mount (common spot). I cut the A pillars halfway up, so the top half of the windshield opening is NOT there, and I cut across the front floor area.......the complete firewall & toe boards are all intact. Jeff Winter (here in Denver) looked at it and said it would have been perfect to repair his original red SCCA car that he "shunted" 6-8 years ago, and Jeff Werth (ex MD now WI) wanted it to repair his "shunted" car but went another direction.

If you are interested, send your EMAIL or TEXT so I can send pics!

I need to get $650 + truck freight. I would strap on a pallet & help trucker load, but you would need to arrange the truck freight........we use online Uship.com or Global Logistics out of MO 636-946-7587 ask for Kyle tell him I sent ya! You can give him an approximate dimension based on your car (sorry don't have right now) & I would GUESS approximately 125-150 lbs (??).

Long shot...........if you are NOT in a big hurry, we MIGHT be going to Road America to race at the Fall Festival in September, MIGHT be able to haul it there, just depends on room in the trailer.

TJ
Denver CO

[yenpit]

PS also saw your inquiry about the complete "roller" in AZ...........I also have a stripped gutted 1969 2dr roller, bone stock, has had front floor pans welded in (stock pans appear to be decent from underneath, so don't really know why), rear tail lamp panel is beat up & some previous owner knucklehead welded a "patch panel" right next to the stock fuel filler opening......the welding is horrible! Another trunk spare tire well was welded in, but looks ok. I have the original front fenders, hood, passenger door (no drivers door), 1/4 windows & trunk lid. Front clip itself is also excellent. I would sell ONLY the roller shell, keep all of the sheetmetal panels, or sell with what I listed.

No title at this point, as I just bought it! Would want $2500 with all the sheetmetal listed cuz this is a pretty clean shell with little rust, or $2000 for ONLY the roller shell.

TJ
Denver CO

[yenpit]

............also I see you are in PA? Do you know John Ross in Pittsburgh? We sold him both of his 240Z vintage race cars!

TJ

[Gereed75]

TJ, definitely interested, most likely in the front clip. Need a hood also. My e mail gereed75@yahoodotcom send some pics. I am not in a big hurry right now so we can explore the options.

Have only met John in passing. Thanks so much for response.

[yenpit]

Pics sent, let me know you got 'em!

I might have a nice clean oem steel hood, but will have to see what I have left!

TJ