WTB - Rear Bearing Spacers for 510

Post your forsale and wanted ads
Post Reply
sssexxx
Posts: 90
Joined: 11 Feb 2013 15:38

WTB - Rear Bearing Spacers for 510

Post by sssexxx » 30 Jul 2018 08:34

Hi Everyone,

Been a long time since I had to post in the Classifieds. I am in a pretty rushed need for two rear wheel bearing spacers. I believe they are number 42 in the attached assembly schematic. If anyone is willing to part with two, one for each side, I would be happy to take them off your hands.

I believe it is number 6 in the diagram below. I have photos of them, but can't host them at the moment. If you think you have what I need, just email me and we can confirm.

Image

User avatar
JordanTr
Posts: 804
Joined: 20 Feb 2013 22:27
Location: Langley, BC, Canada

Re: WTB - Rear Bearing Spacers for 510

Post by JordanTr » 30 Jul 2018 17:37

You’ll also want to get the proper length as there are multiple sizes.
Jordan | '72 2 door KA project | '94 240sx RB26DETT | '97 Silvia RB25DET | '90 Audi 90 Quattro 20V (DD)

User avatar
Byron510
Moderator
Posts: 11999
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

Re: WTB - Rear Bearing Spacers for 510

Post by Byron510 » 30 Jul 2018 20:44

If you haven’t already read this thread - like others there’s many who have shared their respective issues;

http://www.the510realm.com/viewtopic.ph ... &start=285

Might be worth a thumb through to give you some ideas.
There are three spaced sizes, it’s covered here in the above thread.


Byron
Love people and use things,
because the opposite never works.

Three B's Racing
Supporter
Posts: 1163
Joined: 03 Mar 2009 11:58
Location: New Hampshire

Re: WTB - Rear Bearing Spacers for 510

Post by Three B's Racing » 31 Jul 2018 05:42

What Byron said....but if you actually need is item #6 then your good for any set you get but if it's item #4 in your diagram you'll have to match the letters stamped on them to the stamped letter on your swing arms outer bearing housing. Let us know what the letter stamped on your swing arms bearing housing is so it can be matched if it is the item you need.
"Lastnight the wife said oh boy when your dead you can't take nothing with you but your soul oh "Think"
- John Lennon

Three B's Racing
Supporter
Posts: 1163
Joined: 03 Mar 2009 11:58
Location: New Hampshire

Re: WTB - Rear Bearing Spacers for 510

Post by Three B's Racing » 02 Aug 2018 05:31

Three B's Racing wrote:
31 Jul 2018 05:42
What Byron said....but if you actually need is item #6 then your good for any set you get but if it's item #4 in your diagram you'll have to match the letters stamped on them to the stamped letter on your swing arms outer bearing housing. Let us know what the letter stamped on your swing arms bearing housing is so it can be matched if it is the item you need.
So which is it? I have a set of the bearing spacers item# 4 Id letter "B"
"Lastnight the wife said oh boy when your dead you can't take nothing with you but your soul oh "Think"
- John Lennon

sssexxx
Posts: 90
Joined: 11 Feb 2013 15:38

Re: WTB - Rear Bearing Spacers for 510

Post by sssexxx » 02 Aug 2018 10:33

Thank you all for your replies. I have pictures I can email which include measurements. Email me?

sssexxx
Posts: 90
Joined: 11 Feb 2013 15:38

Re: WTB - Rear Bearing Spacers for 510

Post by sssexxx » 04 Aug 2018 10:21

Still searching....

User avatar
MikeY
Posts: 396
Joined: 26 Jun 2003 16:25
Location: Qualicum Van Isle

Re: WTB - Rear Bearing Spacers for 510

Post by MikeY » 04 Aug 2018 14:19

You still haven't said if you want # 4 or #6 in your picture. If it's #4. You haven't said if you want A, B ,or C. B is quite common and you have been offered a pair of those. Clarity will help.
I am starting to think I'm getting old and grumpy. Lol
Good luck with your car.

eastbaysolo_73
Posts: 277
Joined: 18 May 2014 09:28
Location: Northern California

Re: WTB - Rear Bearing Spacers for 510

Post by eastbaysolo_73 » 11 Aug 2018 13:18

Not trying to thread jack. But I just took these apart due to upgrading to spherical bearing set up and I notice I'm missing a complete spacer. Maybe even more. The missing bearing are still inside the control arm. What do you guys think hard to tell from that photo diagram but am I missing the smaller spacer also? Good thing I took these apart PO said he replaced all the bearings.
ImageWheelbearing by v p, on Flickr
Nor Cal Meng !

Three B's Racing
Supporter
Posts: 1163
Joined: 03 Mar 2009 11:58
Location: New Hampshire

Re: WTB - Rear Bearing Spacers for 510

Post by Three B's Racing » 13 Aug 2018 07:31

eastbaysolo_73 wrote:
11 Aug 2018 13:18
Not trying to thread jack. But I just took these apart due to upgrading to spherical bearing set up and I notice I'm missing a complete spacer. Maybe even more. The missing bearing are still inside the control arm. What do you guys think hard to tell from that photo diagram but am I missing the smaller spacer also? Good thing I took these apart PO said he replaced all the bearings.
ImageWheelbearing by v p, on Flickr
Yeah, your missing the cylindrical spacer between the bearings but you do have the smaller spacer for the outside bearing in place.
"Lastnight the wife said oh boy when your dead you can't take nothing with you but your soul oh "Think"
- John Lennon

eastbaysolo_73
Posts: 277
Joined: 18 May 2014 09:28
Location: Northern California

Re: WTB - Rear Bearing Spacers for 510

Post by eastbaysolo_73 » 14 Aug 2018 13:03

Three B's Racing wrote:
13 Aug 2018 07:31
eastbaysolo_73 wrote:
11 Aug 2018 13:18
Not trying to thread jack. But I just took these apart due to upgrading to spherical bearing set up and I notice I'm missing a complete spacer. Maybe even more. The missing bearing are still inside the control arm. What do you guys think hard to tell from that photo diagram but am I missing the smaller spacer also? Good thing I took these apart PO said he replaced all the bearings.
ImageWheelbearing by v p, on Flickr
Yeah, your missing the cylindrical spacer between the bearings but you do have the smaller spacer for the outside bearing in place.
When I took them apart thats how they were :shock: . I don't have any spacer's aside from that big one in the photo. It is stamped with the letter B. So I need two small ones and the bigger one with the letter B I take it. If anyone has those please PM me. Thank for the reply Three B's Racing.
Imagespacers by v p, on Flickr
Nor Cal Meng !

eastbaysolo_73
Posts: 277
Joined: 18 May 2014 09:28
Location: Northern California

Re: WTB - Rear Bearing Spacers for 510

Post by eastbaysolo_73 » 14 Aug 2018 14:35

Ok fellas turns out I found a spacer with the B stamped on it in my storage. So I will not be needing those after all. The smaller spacer are there also. Thanks
Nor Cal Meng !

Post Reply