Aftermarket headlights

New posts disabled. Archived technical discussion about the Datsun PL510
User avatar
vgwagon
Posts: 1589
Joined: 22 Jun 2004 22:42
Location: Burnaby, British Columbia

Post by vgwagon » 25 Jul 2004 17:54

Lordco has apc headlights that fit the 510, they have a flat front and clear glass, and the housing isn't plastic either.
Pretty nice lights actually, here is a shot when I still had the aircraft lights as decoration, now I got all 4 the same.
They are an h4 set up, $30 bucks ea and $28pr for bulbs.
Basically when the smoke cleared, it cost me $150 for 4.
plug and play
Good luck
Attachments
lights.jpg

sspikey
Posts: 283
Joined: 13 Mar 2004 06:06
Location: Montreal canada
Contact:

Post by sspikey » 25 Jul 2004 18:49

APC lists two different ones can you give us the part # you got? ill buy em tomorrow

User avatar
vgwagon
Posts: 1589
Joined: 22 Jun 2004 22:42
Location: Burnaby, British Columbia

Post by vgwagon » 25 Jul 2004 19:47

sspikey wrote:APC lists two different ones can you give us the part # you got? ill buy em tomorrow
part# 403664hl
Denis Gagné
AKA VGwagon

69 510 VG30e swapped
73 240z VG30et swapped
86 300zx na2t VG30et converted

User avatar
vgwagon
Posts: 1589
Joined: 22 Jun 2004 22:42
Location: Burnaby, British Columbia

Post by vgwagon » 25 Jul 2004 19:52

the only thing is you'll have to put something behind the light where the trim holds the bulb, otherwise the light will rattle around.....you can used some small diameter vacuum line or rc car fuel line to shim the back of the light and then all you have to do is center the cuts in the reflector.
Denis Gagné
AKA VGwagon

69 510 VG30e swapped
73 240z VG30et swapped
86 300zx na2t VG30et converted

Post Reply