Engine info for NapZ engine and L20 head ?
Engine info for NapZ engine and L20 head ?
I am more of a 240 person but I recently picked up a very clean 510. The previous owner was in the process of building a NapZ engine with a L20 head. I am very familliar with all the L series engines but not the NapZ. The engine itself is very similiar to the L series block. I need info on the do's and don'ts of this engine and head combo. Are all the torque specs the same for the NapZ ? Any websites or info would be great !
- jovial_cynic
- Supporter
- Posts: 628
- Joined: 23 Jun 2003 15:49
- Location: Central Valley, CA
- jovial_cynic
- Supporter
- Posts: 628
- Joined: 23 Jun 2003 15:49
- Location: Central Valley, CA
Here's what it says exactly........Connecting rod big end nut---------- 36 ft-lp and Main bearing cap bolts----------36 ft-lp
This is what was writen in the Haynes, if these arnt the items you were looking for I can look again. I also have a Chiltonis that helps too.....
This is what was writen in the Haynes, if these arnt the items you were looking for I can look again. I also have a Chiltonis that helps too.....
72 2 door
69 4 door/rust...sold
85 Corolla GTS.....pending repair
69 4 door/rust...sold
85 Corolla GTS.....pending repair
Hey, why don't you scan some of the tables in the Haynes/Chilton book, and post them under the TECH section in the gallery? I did a few scans with one of the L-series motor manuals.
Scan the diagrams if you can, if it has a wiring diagram it'd be awesome!!!
Scan the diagrams if you can, if it has a wiring diagram it'd be awesome!!!
Steve Boatman
Grants Pass, OR
1971 510 2DR | KA24DE
Grants Pass, OR
1971 510 2DR | KA24DE
Drats!!!
Damn! Wish you could find a way to get them..
-pokes Spencer- Don't you have shop manuals availiable?
If somebody would scan some things it'd be great! I mean, it's an enthusiast site. At least scan them and keep them ready to send to somebody that aks for them, or something to that effect...
Damn! Wish you could find a way to get them..
-pokes Spencer- Don't you have shop manuals availiable?
If somebody would scan some things it'd be great! I mean, it's an enthusiast site. At least scan them and keep them ready to send to somebody that aks for them, or something to that effect...
Steve Boatman
Grants Pass, OR
1971 510 2DR | KA24DE
Grants Pass, OR
1971 510 2DR | KA24DE
why donesn't everyone who doesn't have atleast manual run our and buy it....right now....go....run along....shew....go!
they're filled with wonderful useful information!
I have atleast 5. Couple for the PL510, one for a HL510, a 280ZX, the Hot to Modify, How to Hot Rod and Race, a Chiltons for like everything in '83, two on Webers....
and they're faster than asking a question on the forum and waiting for one of us to look in ours....
they're filled with wonderful useful information!
I have atleast 5. Couple for the PL510, one for a HL510, a 280ZX, the Hot to Modify, How to Hot Rod and Race, a Chiltons for like everything in '83, two on Webers....
and they're faster than asking a question on the forum and waiting for one of us to look in ours....
richard norrish
'68 'goon resto / '71 ice racer / '72 'goon project / '70 4-door rust pile / '67 520 project
----------------------------------------------------------------------
'68 'goon resto / '71 ice racer / '72 'goon project / '70 4-door rust pile / '67 520 project
----------------------------------------------------------------------
shardik wrote: My swap will be made of solid gold and it will run on puppy farts.