L20b into 2dr 510
L20b into 2dr 510
Does a L20b bolt straight on with no mods to get the engine working in a 510?
- ///FiveOneOh
- Posts: 2136
- Joined: 23 Jun 2003 00:21
- Location: Abbotsford
- ///FiveOneOh
- Posts: 2136
- Joined: 23 Jun 2003 00:21
- Location: Abbotsford
LZ and Z are different. the LZ intakes and exausts on the drivers side. its also carbed. the Z has a cross flow head with EFI. Talk to tobie he just finished a Z20E swap.
Dumbass_mofo@hotmail.com
Dumbass_mofo@hotmail.com
An LZ22 is just a 2.2 litre NapsZ bottom end with a L series head on it.
It might be an idea for you to grab that engine you're talking about and then stick an L-series head on it...and you're set.
Obviously there is a bit more to it...but I'll leave that to the few on this board that have already done it!
It might be an idea for you to grab that engine you're talking about and then stick an L-series head on it...and you're set.
Obviously there is a bit more to it...but I'll leave that to the few on this board that have already done it!
- ///FiveOneOh
- Posts: 2136
- Joined: 23 Jun 2003 00:21
- Location: Abbotsford
- ///FiveOneOh
- Posts: 2136
- Joined: 23 Jun 2003 00:21
- Location: Abbotsford