wheel fitment 510

New posts disabled. Archived technical discussion about the Datsun PL510
Post Reply
Crevier
Posts: 143
Joined: 06 Apr 2007 19:42

wheel fitment 510

Post by Crevier »

wondering if 15x7 0 offset under unflared rear fender will fit? with 205 50?
User avatar
510-Trevor
Supporter
Posts: 1373
Joined: 03 Mar 2007 18:34
Location: Calgary, Alberta

Re: wheel fitment 510

Post by 510-Trevor »

I used the search and found this: (check page 2) http://www.the510realm.com/phpBB3/viewt ... set#p71836
1972 Yellow 4dr
sil8y
Posts: 28
Joined: 06 Feb 2008 15:31
Location: Portland, OR.

Re: wheel fitment 510

Post by sil8y »

yes it will. ...by just a hair. but i recommend that you go with a 195 50 over the 205. i have 205s on my 15x8 0offset and i wish i would have gone 195s. you could even go for a 185 65 or a 175 65 and it would look great. i had to roll the s**t out of mine with the 8s and the 205s.... but mine is slamed! :)
User avatar
duke
Supporter
Posts: 1875
Joined: 26 Oct 2005 14:21
Location: Santa Rosa, CA

Re: wheel fitment 510

Post by duke »

They do fit, but require the use of 280zx struts because they narrow the front track a little. A little bit of front camber also helps. The fenders will also need to be rolled. In the rear you will need to roll the fenders and run a good amount of camber. So yes, they can be made to fit under stock fenders, but IMO, for proper alignment and best performance, flares are needed. Search the site, cause I have written this a few times.

sil8y, do you have any pictures of you car? I'd like to see how the wheels fit.
Duke Schimmer

'72 2-Door 510
"Simplify and add lightness."
Tyler
Posts: 94
Joined: 14 Feb 2007 17:15
Location: Vancouver

Re: wheel fitment 510

Post by Tyler »

here a site that will give u almsot everything u need to know


http://images.google.ca/imgres?imgurl=h ... n%26sa%3DN
Post Reply