Datsun 510 SSS
Re: Datsun 510 SSS
by Camano510 on Thu Feb 25, 2010 6:30 pm
Wow. Simply gorgeous work. Bravo Miquel!
Darryl Cavanaugh
"There is no such thing as free school. Every lesson learned cost me some form of 'tuition'. Time, money, or pain. Sometimes all three".
71 510 2dr father/son project
"There is no such thing as free school. Every lesson learned cost me some form of 'tuition'. Time, money, or pain. Sometimes all three".
71 510 2dr father/son project
- Camano510
- Supporter
- Posts: 162
- Joined: Thu Jun 14, 2007 6:13 am
- Location: Camano Island, WA.
Re: Datsun 510 SSS
by wilderb on Fri Feb 26, 2010 5:16 am
miguel sss wrote:Does anybody know what material is made the panel?
It is aluminum?
yes they are made of aluminum, you will find that if you try to cut to fit the hole on the right side will be left but only half of the inner one
- wilderb
- Posts: 329
- Joined: Wed Jun 21, 2006 5:07 am
- Location: los angeles
Re: Datsun 510 SSS
by miguel sss on Thu Mar 25, 2010 1:19 pm
Here goes .... fresh news past 3 months without going to see the treatment the plate, here's the news:
The right side is already complete, missing only the rear:
Now deal with missing rear, as that there was tá a bit rotten, we took the back of another that was in better shape ....
We take another bag, because the other spent a lot of work .... ... and time to fix it
The rear panel is already to take the proper treatment to go into place:
The right side is already complete, missing only the rear:
Now deal with missing rear, as that there was tá a bit rotten, we took the back of another that was in better shape ....
We take another bag, because the other spent a lot of work .... ... and time to fix it
The rear panel is already to take the proper treatment to go into place:
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by miguel sss on Mon Mar 29, 2010 9:22 pm
Well, here's news .... we've already pulled the back that was there ...
And it put the other !!!!!
And it put the other !!!!!
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by miguel sss on Fri Apr 02, 2010 11:14 am
After waiting a bit ... I got the order came not only that .... but for this car was ...
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by miguel sss on Thu Apr 15, 2010 10:42 pm
Material that came from zing
Apply the epoxy:
Already painted:
Apply the epoxy:
Already painted:
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by Ash510 on Sat Apr 17, 2010 5:28 pm
wow... looking very nice, keep up the goood work.
- Ash510
- Posts: 169
- Joined: Tue Jun 22, 2004 3:31 am
- Location: Surrey,B.C.
Re: Datsun 510 SSS
by torqued on Fri Jun 18, 2010 12:56 am
Hey miguel.
Just been reading though this build thinking shit this all looks familar then looked at the name , I have also been following this on nzdatsun.com
Just been reading though this build thinking shit this all looks familar then looked at the name , I have also been following this on nzdatsun.com
- torqued
- Posts: 6
- Joined: Thu Jun 17, 2010 9:02 pm
Re: Datsun 510 SSS
by miguel sss on Tue Jun 22, 2010 12:09 am
torqued wrote:Hey miguel.
Just been reading though this build thinking shit this all looks familar then looked at the name , I have also been following this on nzdatsun.com
Hello!!
Yes, it's the same topic ....
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by miguel sss on Tue Jun 22, 2010 12:21 am
Hello friends,
I have given no news, because I had a lot of work, the restoration did not stop ... just slowed down a bit, but this phase is already happening and we'll have news soon ...
My last job in the car
I have given no news, because I had a lot of work, the restoration did not stop ... just slowed down a bit, but this phase is already happening and we'll have news soon ...
My last job in the car
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by miguel sss on Tue Jul 27, 2010 12:04 am
So here is news!
The reinforcement was made:
Now the material has already recovered, the oil and gas pipes:
The divisions of the rear doors ready:
Tubes of oil brakes
The reinforcement was made:
Now the material has already recovered, the oil and gas pipes:
The divisions of the rear doors ready:
Tubes of oil brakes
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Re: Datsun 510 SSS
by miguel sss on Fri Sep 03, 2010 12:21 am
Well more news of the work, now on holiday walked back to him and is already in the process of painting .... I do not have many photos, but I'll put what I have!!
Part of the plate just got some pictures, but he already have everything assembled, already has closures to test the doors ... etc ... I not have pictures of it all ... let those that have:
Now one more purchase
Part of the plate just got some pictures, but he already have everything assembled, already has closures to test the doors ... etc ... I not have pictures of it all ... let those that have:
Now one more purchase
-
miguel sss - Posts: 178
- Joined: Fri Sep 19, 2008 9:27 pm
- Location: Porto- Portugal
Return to Featured Project Builds
Who is online
Users browsing this forum: No registered users and 2 guests