3/4" Wheels Spacers

Post by **arkitekz** » 28 Jun 2009 22:11

Does anyone know where I can get 3/4" wheel spacers? I have a 71 2dr. with 280zx front brake and techno toy tuning coilivers set up. I also have 16x7 rota rb +22mm offset w/ 205 25 16. I already got the extended arp 100 7708 wheel studs so I was looking for a slip on spacer not bolt on. Thanks.

Post by **gnar510** » 29 Jun 2009 03:41

Mine were custom made by techno toy. Just ask them, not something they advertise on their site but they do make them. Keep in mind they could be just a little off when you get them. Some minor machining may be required.

Post by **arkitekz** » 29 Jun 2009 07:47

Do you recall the cost?

Post by **defdes** » 29 Jun 2009 08:22

H&R Wheel Spacers makes them.

Post by **bertvorgon** » 29 Jun 2009 08:32

Specialty Engineering makes custom wheel spacers. Call them for price. 604-521-9232

This is a wheel spacer on my 280zx hubs. I have a variety of thickness's to both change offset and handling characteristics. One of my rear spacers is 1" thick.

Post by **arkitekz** » 29 Jun 2009 11:22

Thanks guys

The 510 Realm

3/4" Wheels Spacers

3/4" Wheels Spacers

Re: 3/4" Wheels Spacers

Re: 3/4" Wheels Spacers

Re: 3/4" Wheels Spacers

Re: 3/4" Wheels Spacers

Re: 3/4" Wheels Spacers