parking brake?

Post by **butters68** » 22 Oct 2010 21:15

does anyone have a pic of there parking brake were it conects to the rear section. not sure if i have the right parts to set this up.

McShagger510 · Post by **McShagger510** » 23 Oct 2010 00:44

Here ya go Mike. These are out of the Datsun 510 parts catalog and shop manual. Hope this helps:

James

McShagger510 · Post by **McShagger510** » 23 Oct 2010 00:47

A few more

Post by **butters68** » 23 Oct 2010 06:59

nice thanks. yes that helped me out ,part 29 there i think is what i need to look for not sure if i have that.i guess i could m&m something.

m&m =mickey mouse......

McShagger510 · Post by **McShagger510** » 23 Oct 2010 09:39

Eh, just stack a few washers in there and you'll be good.

Post by **butters68** » 25 Oct 2010 21:58

yah i was kind of leaning that way .

Post by **butters68** » 02 Nov 2010 18:28

well i was looking at my parking brake line today to figure out how i was going to set it up ,and of coarse there are no threads just a square end. i guess its fubared.

Post by **butters68** » 02 Nov 2010 20:43

is there some were i can get a replacement cable ?

Post by **proflex** » 02 Nov 2010 22:48

butters68 wrote:well i was looking at my parking brake line today to figure out how i was going to set it up ,and of coarse there are no threads just a square end. i guess its fubared.

If part of the end is still on the cable and looks strong enough still , try putting on a cable end {like part 43} onto it and then pin it into the pin hole location 33, using a pin like 39. Adjust cable with 44.

Chad

Post by **butters68** » 03 Nov 2010 16:27

there is about 3/4 of an inch at the end of the cable and i don't think i pin would hold to well.maybe i could get out the tap and die set.

paul97 · Post by **paul97** » 09 Aug 2020 10:23

Does anyone know where I can get the return spring # 35 in the picture? Mine is missing.

yenpit · Post by **yenpit** » 28 Aug 2020 13:57

paul97, PM sent!

TJ

Post by **tycot1** » 31 Aug 2020 17:27

Mike if there is enough of the rod still there just pick up a piece of rod, cut some threads into it then weld it on. You can borrow my kit if you dont have one.

JLsKA · Post by **JLsKA** » 25 Dec 2020 21:32

My rear left cable is frayed from rubbing on the exhaust pipe (rear disc brakes changed the angle).
I was wondering if anyone has ordered the rear parking brake kits from ebay/Thailand?

MikeY · Post by **MikeY** » 26 Dec 2020 09:14

I have used the eBay/Thailand brake cables a few times. They are fine. Not quite as nice as stock. They fit fine but don't have the little rubber boot at each end to help protect the cable in the housing. And once I had to grind the clip groove slightly to get the clip in. But it's all there's is and priced right.

The 510 Realm

parking brake?

parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?

Re: parking brake?