Hey all, I have been searching all over and short of spending $800 bucks on a Tilton i cannot find a 3 Chamber reservoir for my 510. gonna put it on the right side shelf area in the engine bay. I would like it to have separate AN fittings as well. any links or help is appreciated.
Thanks.
Affordable 3 chamber reservoir?
Re: Affordable 3 chamber reservoir?
Jeez, $800?!? That seems silly. I'll make you one for $750
Re: Affordable 3 chamber reservoir?
What's all this, then?
Perhaps a picture of the Tilton unit, so we know what you're on about?
Perhaps a picture of the Tilton unit, so we know what you're on about?
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
- two_68_510s
- Supporter
- Posts: 3894
- Joined: 18 Apr 2010 11:20
- Location: Ben Lomond California
Re: Affordable 3 chamber reservoir?
Like this?
http://www.ebay.com/itm/Tilton-3-Chambe ... vi-content
Is this one too tall?
http://www.summitracing.com/parts/til-7 ... 4AodvBMA1g
http://www.ebay.com/itm/Tilton-3-Chambe ... vi-content
Is this one too tall?
http://www.summitracing.com/parts/til-7 ... 4AodvBMA1g
Joel
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
Re: Affordable 3 chamber reservoir?
http://www.summitracing.com/parts/til-7 ... dia/images
the same, but with -AN fittings rather than nipple fittings
the same, but with -AN fittings rather than nipple fittings
- oldschool80sguy
- Posts: 106
- Joined: 30 Apr 2011 10:53
Re: Affordable 3 chamber reservoir?
Exactly but i was hoping to find an aluminum or steel one. this one may be too tall but if it comes down to it i may go this route.510rob wrote:http://www.summitracing.com/parts/til-7 ... dia/images
the same, but with -AN fittings rather than nipple fittings