Konig Rewind brake clearance (answered)

Suspension, including wheel, tire and brake.
Post Reply
User avatar
Techromancer
Supporter
Posts: 95
Joined: 16 Feb 2012 19:48
Location: Vancouver, BC

Konig Rewind brake clearance (answered)

Post by Techromancer »

I'm looking to get some 15x7 +0 Konig Rewinds and I wanted to make sure that they would fit over my brakes. Does anyone have a set that wouldn't mind measuring one of their wheels? I've tried looking around the forums and didn't see any info.

For reference:
I have Wilwood brakes up front (don't have the part number on hand but they're 4 piston).

I have Rota Grid V 15x8 +0 wheels that clear the brakes no problem.
Last edited by Techromancer on 28 Oct 2013 09:32, edited 1 time in total.
User avatar
okayfine
Supporter
Posts: 14154
Joined: 12 Nov 2007 23:02
Location: Newbury Park, CA

Re: Konig Rewind brake clearance (anyone mind measuring whee

Post by okayfine »

Helpful to suggest what you'd like measured, at least the rotor size you have (if not the part number), or where you think you might have problems.
Because when you spend a silly amount of money on a silly, trivial thing that will help you not one jot, you are demonstrating that you have a soul and a heart and that you are the sort of person who has no time for Which? magazine. – Jeremy Clarkson
User avatar
Techromancer
Supporter
Posts: 95
Joined: 16 Feb 2012 19:48
Location: Vancouver, BC

Re: Konig Rewind brake clearance (anyone mind measuring whee

Post by Techromancer »

It's an Aimco 1013243 rotor, 11.25" with a Wilwood Dynalite caliper. I'm just worried about the spokes clearing the caliper, so the inner profile of the spoke is all that matters.
User avatar
johnbureezu
Posts: 638
Joined: 07 Jun 2007 11:22
Location: Sunny Diego

Re: Konig Rewind brake clearance (anyone mind measuring whee

Post by johnbureezu »

I have 15x7 0 offset rewinds and wilwood dynalites on 12"+ rotors and they clear just fine. Close but they fit. Just watch where you place the stick on wheel weights. I'm also using the .81" thick rotor.
http://easytunegarage.blogspot.com/
User avatar
Techromancer
Supporter
Posts: 95
Joined: 16 Feb 2012 19:48
Location: Vancouver, BC

Re: Konig Rewind brake clearance (anyone mind measuring whee

Post by Techromancer »

Awesome, thanks so much.
Post Reply