Page 1 of 1

Konig Rewind brake clearance (answered)

Posted: 23 Oct 2013 10:13
by Techromancer
I'm looking to get some 15x7 +0 Konig Rewinds and I wanted to make sure that they would fit over my brakes. Does anyone have a set that wouldn't mind measuring one of their wheels? I've tried looking around the forums and didn't see any info.

For reference:
I have Wilwood brakes up front (don't have the part number on hand but they're 4 piston).

I have Rota Grid V 15x8 +0 wheels that clear the brakes no problem.

Re: Konig Rewind brake clearance (anyone mind measuring whee

Posted: 23 Oct 2013 10:28
by okayfine
Helpful to suggest what you'd like measured, at least the rotor size you have (if not the part number), or where you think you might have problems.

Re: Konig Rewind brake clearance (anyone mind measuring whee

Posted: 23 Oct 2013 12:18
by Techromancer
It's an Aimco 1013243 rotor, 11.25" with a Wilwood Dynalite caliper. I'm just worried about the spokes clearing the caliper, so the inner profile of the spoke is all that matters.

Re: Konig Rewind brake clearance (anyone mind measuring whee

Posted: 23 Oct 2013 14:16
by johnbureezu
I have 15x7 0 offset rewinds and wilwood dynalites on 12"+ rotors and they clear just fine. Close but they fit. Just watch where you place the stick on wheel weights. I'm also using the .81" thick rotor.

Re: Konig Rewind brake clearance (anyone mind measuring whee

Posted: 24 Oct 2013 14:52
by Techromancer
Awesome, thanks so much.