Have access to a 200 sx

Suspension, including wheel, tire and brake.
Post Reply
vetteguy22
Posts: 38
Joined: 05 Dec 2016 22:19
Location: Prescott Valley AZ

Have access to a 200 sx

Post by vetteguy22 » 29 Mar 2018 21:35

I have access to a 1985 4 cylinder 200sx. What parts are usable on my Datsun 510 build. I’ve taken the rear dif and axels out. Are the axels useable and if so how do I adapt them to the 510 hubs or is there a way to use the 200sx hubs.
I’m going to use the rear disc brakes and have removed the parking brake hardware. It has a 5 speed trani but doesn’t appear that it will work since the starter mounts up high on the passenger side.
What else should I be taking off before getting rid of it.

User avatar
GREG510
Posts: 503
Joined: 23 Jun 2003 23:12
Location: Richmond B.C.
Contact:

Re: Have access to a 200 sx

Post by GREG510 » 30 Mar 2018 01:59

Is the 5 speed not the Dog leg... Reverse up to the left.???
I had one in my 510 many moons ago

vetteguy22
Posts: 38
Joined: 05 Dec 2016 22:19
Location: Prescott Valley AZ

Re: Have access to a 200 sx

Post by vetteguy22 » 30 Mar 2018 08:27

No reverse is to the right below 5th gear

User avatar
JordanTr
Posts: 800
Joined: 20 Feb 2013 22:27
Location: Langley, BC, Canada

Re: Have access to a 200 sx

Post by JordanTr » 30 Mar 2018 18:44

Where are you located? I’d be interested in rear control arms.
Jordan | '72 2 door KA project | '94 240sx RB26DETT | '97 Silvia RB25DET | '90 Audi 90 Quattro 20V (DD)

vetteguy22
Posts: 38
Joined: 05 Dec 2016 22:19
Location: Prescott Valley AZ

Re: Have access to a 200 sx

Post by vetteguy22 » 30 Mar 2018 21:06

I’m located in Arizona

User avatar
JordanTr
Posts: 800
Joined: 20 Feb 2013 22:27
Location: Langley, BC, Canada

Re: Have access to a 200 sx

Post by JordanTr » 31 Mar 2018 10:35

Ok nvm
Jordan | '72 2 door KA project | '94 240sx RB26DETT | '97 Silvia RB25DET | '90 Audi 90 Quattro 20V (DD)

Post Reply