Have access to a 200 sx

vetteguy22 · Post by **vetteguy22** » 29 Mar 2018 21:35

I have access to a 1985 4 cylinder 200sx. What parts are usable on my Datsun 510 build. I’ve taken the rear dif and axels out. Are the axels useable and if so how do I adapt them to the 510 hubs or is there a way to use the 200sx hubs.
I’m going to use the rear disc brakes and have removed the parking brake hardware. It has a 5 speed trani but doesn’t appear that it will work since the starter mounts up high on the passenger side.
What else should I be taking off before getting rid of it.

GREG510 · Post by **GREG510** » 30 Mar 2018 01:59

Is the 5 speed not the Dog leg... Reverse up to the left.???
I had one in my 510 many moons ago

vetteguy22 · Post by **vetteguy22** » 30 Mar 2018 08:27

No reverse is to the right below 5th gear

JordanTr · Post by **JordanTr** » 30 Mar 2018 18:44

Where are you located? I’d be interested in rear control arms.

vetteguy22 · Post by **vetteguy22** » 30 Mar 2018 21:06

I’m located in Arizona

JordanTr · Post by **JordanTr** » 31 Mar 2018 10:35

Ok nvm

The 510 Realm

Have access to a 200 sx

Have access to a 200 sx

Re: Have access to a 200 sx

Re: Have access to a 200 sx

Re: Have access to a 200 sx

Re: Have access to a 200 sx

Re: Have access to a 200 sx