I have access to a 1985 4 cylinder 200sx. What parts are usable on my Datsun 510 build. I’ve taken the rear dif and axels out. Are the axels useable and if so how do I adapt them to the 510 hubs or is there a way to use the 200sx hubs.
I’m going to use the rear disc brakes and have removed the parking brake hardware. It has a 5 speed trani but doesn’t appear that it will work since the starter mounts up high on the passenger side.
What else should I be taking off before getting rid of it.
Have access to a 200 sx
-
- Posts: 69
- Joined: 05 Dec 2016 22:19
- Location: Prescott Valley AZ
Re: Have access to a 200 sx
Is the 5 speed not the Dog leg... Reverse up to the left.???
I had one in my 510 many moons ago
I had one in my 510 many moons ago
-
- Posts: 69
- Joined: 05 Dec 2016 22:19
- Location: Prescott Valley AZ
Re: Have access to a 200 sx
No reverse is to the right below 5th gear
Re: Have access to a 200 sx
Where are you located? I’d be interested in rear control arms.
'72 2 door KA project | S14 Silvia RB25DET | S14 RB26DETT (sold) | '90 Audi 90Q20V (sold)
-
- Posts: 69
- Joined: 05 Dec 2016 22:19
- Location: Prescott Valley AZ
Re: Have access to a 200 sx
I’m located in Arizona
Re: Have access to a 200 sx
Ok nvm
'72 2 door KA project | S14 Silvia RB25DET | S14 RB26DETT (sold) | '90 Audi 90Q20V (sold)