My 4-door "budget build" - Warning, camera phone pics!

View and post your 510 project(s)
User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 09 Oct 2010 17:08

So a quick update (which will take ages using dialup), I came across a genuine 72 SSS body for sale, minus all the bolt-on panels and interior, engine, driveline, pretty much a bare shell. It was advertised as panelled, ready for paint and it was way less rusty than my other shell, (which had lots of dents in the rear quarters from having heavy stuff in the boot) and it was a genuine SSS so I bought it since I already had the SSS dash and badges.

Idropped the shell off to my panelbeater in early April and for once my motivation isn't what's holding this project back, it's his!

Here's where it's at so far:
IMG_0908edit.JPG
After pulling up the sound deadening I discovered more cancer.... still not as bad as the other car though
IMG_0908edit.JPG (24.47 KiB) Viewed 610 times
IMG_0909.JPG
Gave the rusty bits a hit with the wire wheel
IMG_0909.JPG (24.9 KiB) Viewed 610 times
IMG_0910.JPG
Under driver's seat...
IMG_0910.JPG (29.54 KiB) Viewed 610 times
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 09 Oct 2010 17:26

On the bright side, rust between the floor and the sound deadening sure makes it easy to lift all that stuff off! It just peeled away in big sheets.... The fibreglass front guards didn't fit this shell as well as they did the old one, basically the bonnet wouldn't shut with them fitted at first, now they sort of fit, but not nicely.

I bought some Techno Phantoms (14x6.5 +12) as a birthday present to myself, unfortunately the seller wasn't too honest and they turned out to have some tiny cracks in the centres radiating outwards, so I now need to budget to get those repaired too.... it doesn't seem fair when I always try to be as honest as possible when I sell stuff!! Oh well.
IMG_0911.JPG
I got this far before the angle grinder died.
IMG_0911.JPG (23.75 KiB) Viewed 609 times
IMG_0913.JPG
Doors sandblasted
IMG_0913.JPG (74.46 KiB) Viewed 609 times
Attachments
IMG_0912.JPG
My patchwork 1600
IMG_0912.JPG (17.14 KiB) Viewed 609 times
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 09 Oct 2010 17:34

IMG_0914.JPG
IMG_0914.JPG (21.18 KiB) Viewed 609 times
IMG_0915.JPG
Engine bay all rubbed back, was painted bright metallic green.. the white patch is where the PO cut a big hole to run the wiring for his Z18ET (yuck!)
IMG_0915.JPG (23.6 KiB) Viewed 609 times
IMG_0916.JPG
Still a few panel fitment issues obviously...
IMG_0916.JPG (16.57 KiB) Viewed 609 times
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 20 Apr 2014 02:37

Long time no updates!

I feel pretty bad when I look at all these threads that haven't been updated in years, no doubt most of the owners lost motivation and sold their cars or parted them out. This update is just to show that I still have my car. And to show Hainz, as I may have given the impression that I intended to sell up last time I talked to him! Sorry man!

Anyway, to bring you up to speed I ended up having to take a guy to court to get my money back for the crappy work he did on this, (what little he actually did). I've moved house/cities several times and I've kept the car, even though it's a giant PITA to move a project that's in pieces. I've changed jobs several times.

Through all of this I still have it. I ended up winning the court case, and with the funds from that plus my redundancy payout I was able to pay a professional body shop to paint and panel the car. Yay! It looked something like this when I got it back:
5892916631_89f31f68b9_z.jpg
5892916631_89f31f68b9_z.jpg (97.25 KiB) Viewed 495 times
5892917357_5e4cf538c1_z.jpg
5892917357_5e4cf538c1_z.jpg (135.69 KiB) Viewed 495 times
5893484688_a0b61ef517_z.jpg
5893484688_a0b61ef517_z.jpg (77.95 KiB) Viewed 495 times



Unfortunately the first guy lost my front door hinges, so they had to spray the car and the doors separately, leaving me with painted doors not fitted to the car. Eventually I located some hinges (from torqued, the 510 realm's other Kiwi member), pulled them apart and fitted new Nissan bushes to them.
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 20 Apr 2014 02:47

As you can see even with my crappy phone pics, it's nice and shiny but it had that big run plus a few other issues that didn't show up on the phone camera pics. So I had to take it back and tell them to fix the issues. They weren't happy about doing it, but I didn't think that these kinds of issues were acceptable for the price I paid. Anyway, they got that stuff fixed, except for the flaky engine bay paint, but at that point I was over dealing with them and also I had to move the car as the lockup had been leased. This move involved a ferry ride to a different island, and I didn't have the doors fitted up properly either (I had the hinges, but they hadn't been painted or fitted). The solution? Fit everything back loosely and plastic wrap the whole car!

My Datsun loving flatmate very kindly helped me do this and drove the whole way - btw, the tow car in these pics is a diesel R30 Skyline wagon, with the LD20, so even my tow car has a L series! Actually I used to own a L26 powered Datsun 260C (Cedric) sedan that I had already used to haul my engine and gearbox and interior back a few months earlier. The boot (trunk to you) was so huge that even with a LPG tank I could easily fit my L20B and 2x 5 speeds in!

Late night before the ferry ride filling the car with my parts and tools and wrapping the body:
2012-09-08 21.34.38.jpg
2012-09-08 21.34.38.jpg (492.31 KiB) Viewed 495 times
2012-09-08 21.34.21.jpg
2012-09-08 21.34.21.jpg (524.45 KiB) Viewed 495 times
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 20 Apr 2014 03:01

Actually here are some better pics from before the wrapping - I haven't edited the previous post because I'm trying to get all this posted before I go to bed! These ones were taken using an actual camera (thanks Mum!)
IMG_1394.JPG
IMG_1394.JPG (671.7 KiB) Viewed 495 times
IMG_1393.JPG
IMG_1393.JPG (627.74 KiB) Viewed 495 times
IMG_1392.JPG
IMG_1392.JPG (550.75 KiB) Viewed 495 times


I pretty much got blinded that day! You may notice the gold zinc plated door strikers - I have a friend that does that for a job, and his prices are very cheap, so I gave him a whole bucket of stuff to do :-)
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 20 Apr 2014 03:17

Here are a couple of pics of this on the ferry. Once we arrived in Christchurch I had a very grey 1600 thanks to the mighty LD20 smoking so much! :lol:

Datsun towing a Datsun:

imag0109resize.jpg
imag0109resize.jpg (91.29 KiB) Viewed 495 times


Me nervously waiting for the ferry to begin loading vehicles.
imag0112na (800x533).jpg
imag0112na (800x533).jpg (292.67 KiB) Viewed 495 times
imag011020121223161028 (800x533).jpg
imag011020121223161028 (800x533).jpg (313.14 KiB) Viewed 495 times


About the tape: We discovered not long after leaving my parents' place that the plastic wrapping tends to flap about and generally unwrap itself when towing at open road speeds. We ended up having to stop and buy every roll of red and blue "100mph tape" that the closest petrol station had, then periodically stop and add more tape as more plastic wrap came undone. This was a source of great amusement to onlookers every time we had to do it.
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 20 Apr 2014 03:50

I pretty much did nothing for another year or so except collect parts (not pictured) and work on other cars. I recently had to move again, and now have no storage for the 1600, so it seemed like the ideal time to get more work done. Although painted on the outside, the doors still aren't fitted and there were still some bodywork issues. These are being addressed now by another Datsun owner (being in the NZ Datsun club helps a lot!) who has very high standards and understands that it's not 1985 anymore and these cars are actually worth doing a decent job on.

First was the boot floor - what looked like a tiny rust hole expanded a lot once we did some digging. This was patched very tidily and seam sealed before spraying with paintable stoneguard and black paint in the entire boot area.
IMG_0326.JPG
IMG_0326.JPG (257.07 KiB) Viewed 494 times
IMG_0342.JPG
IMG_0342.JPG (236.75 KiB) Viewed 494 times
IMG_0350.JPG
IMG_0350.JPG (232.64 KiB) Viewed 494 times
IMG_0351.JPG
IMG_0351.JPG (231.25 KiB) Viewed 494 times
IMG_0365 (800x598).jpg
IMG_0365 (800x598).jpg (224.27 KiB) Viewed 494 times
IMG_0426 (800x598).jpg
IMG_0426 (800x598).jpg (279.11 KiB) Viewed 494 times


That's all for tonight - I have more to put up, but it's getting quite late. Anyway, you get the idea - I'm doing stuff!
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
broke
Posts: 155
Joined: 04 Sep 2003 01:07
Location: New Zealand
Contact:

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby broke » 29 Jan 2017 14:23

Another bi-annual update.. Things got in the way again, I bought a house, got married etc.

I built a rotisserie because I just couldn't tolerate scraping underseal and repainting while on my back and getting covered with the stuff. Finally finished stripping all the old underseal, found a few more patches of rust so cut out and welded in new metal. Painted the underside.

In March my panel guy will underseal and paint the interior. Then I'll flip it back over and put crossmembers back in so that he can fit the doors.

Image
Image
The IDx 10 concept is based on the 510 in the same way that the urinating I was doing last night was based on a 30 yr old single-malt scotch.
-McWicked

User avatar
KiKiIchiBan
Supporter
Posts: 228
Joined: 26 Feb 2014 23:46
Location: South East London, England

Re: My 4-door "budget build" - Warning, camera phone pics!

Postby KiKiIchiBan » 30 Jan 2017 13:04

Good progress!
My Bluebird SSS Coupe #25
http://www.the510realm.com/viewtopic.php?t=26929


Return to “Project Builds”



Who is online

Users browsing this forum: No registered users and 4 guests