The 510 Realm

Well I am preparing to do the final bagging and resin infusion of my primary plenum section. It had been molded in a fiberglass mold with a custom bladder inside. In the Process the bladder folded slightly inside the mold and created some voids. So I have used another two layers of carbon to cover the part. I filled the inside with 6 lb foam to hold the shape against the pressure of the vacuum bagging. The foam takes place of the bladder which broke up during the process. I will try to remember to takes pics, which I didn't do on the last molding. Acetone will melt the foam completely when epoxy sets up, it doesn't touch the epoxy.

Neat stuff Joel

Pretty trailblazing stuff there Joel. Good to see you back at it!

Well, I am back home like everyone else, and have time for the 510! Thought I would complete the dash before assembling the engine. No connection really, just know more about wood than engines!! Inside of glove box door, Carpathian Elm. Vacuum press

Beautiful work!

RONSLYCHUK wrote: ↑10 Apr 2020 17:04 Beautiful work!

Thanks! better next week when finish is on completely

WOW, Very nice.