Ok, so here is a set up that just may have passed me by over the years. This was procured by Glen, a local member and neighbor to me from a racer here in the Vancouver area. The set up looks simple enough, and the parts consist of an R160 VLSD from a Subi, 4.11 gears is what we know. But the mystery half shafts and a mystery companion flange that bolts to our stub axles needs to be identified.
Can anyone identify the half shafts and companion flange, as the parts are unknown to me.
I would hazard to guess 200SX, 85-86 for the half shafts and CV flange, but that's just a shot in the dark.
Love to hear from people who would know what this set up might be.
Merry Christmas to you all.
Byron
R160 OEM shaft, joint and flange identification
R160 OEM shaft, joint and flange identification
- Attachments
-
- Glen's CV set up (Medium).JPG (195.15 KiB) Viewed 1325 times
-
- Glen's CV set up 3 (Medium).JPG (178.72 KiB) Viewed 1325 times
-
- Glen's CV set up 2 (Medium).JPG (183.32 KiB) Viewed 1325 times
Love people and use things,
because the opposite never works.
because the opposite never works.