R160 OEM shaft, joint and flange identification
Posted: 23 Dec 2016 10:11
Ok, so here is a set up that just may have passed me by over the years. This was procured by Glen, a local member and neighbor to me from a racer here in the Vancouver area. The set up looks simple enough, and the parts consist of an R160 VLSD from a Subi, 4.11 gears is what we know. But the mystery half shafts and a mystery companion flange that bolts to our stub axles needs to be identified.
Can anyone identify the half shafts and companion flange, as the parts are unknown to me.
I would hazard to guess 200SX, 85-86 for the half shafts and CV flange, but that's just a shot in the dark.
Love to hear from people who would know what this set up might be.
Merry Christmas to you all.
Byron
Can anyone identify the half shafts and companion flange, as the parts are unknown to me.
I would hazard to guess 200SX, 85-86 for the half shafts and CV flange, but that's just a shot in the dark.
Love to hear from people who would know what this set up might be.
Merry Christmas to you all.
Byron