Distributor Choice with MSD 6AL

Engine, Transmission and related drivetrain.
BrandonS
Supporter
Posts: 50
Joined: 21 Feb 2016 19:32

Distributor Choice with MSD 6AL

Postby BrandonS » 09 Apr 2017 09:30

I was just mulling over some ideas for down the road and was looking into the MSD stuff. I know that there is a myriad of opinions on MSD devices, but let's put that aside. I got to thinking about using one and then thought about my distributor and it's tiny cap and how much larger the later style distributor caps are.

So say you were going to work up a performance engine; it can be either N/A or boosted. IN either scenario you might possibly retard or boost timing more than a stock ignition system. In these cases do you think there would be a significant possibility of the spark jumping to more than one terminal in the distributor with a smaller capped distributor vs with a conversion to a larger diameter capped later model distributor? If not is there any other advantage to switching to a newer style (electronic) distributor with an MSD?

datzenmike
Supporter
Posts: 5186
Joined: 24 May 2006 12:40
Location: Van. Isle.

Re: Distributor Choice with MSD 6AL

Postby datzenmike » 09 Apr 2017 12:18

If the cap, rotor and wires are good quality and in good shape the spark has no choice but to jump the spark plug gap. The L20B came with points and EI and both had the slightly larger diameter cap. Get an EI distributor and forget the MSG.
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs

510rob
Moderator
Posts: 4520
Joined: 09 Oct 2003 23:37
Location: Vancouver, BC
Contact:

Re: Distributor Choice with MSD 6AL

Postby 510rob » 09 Apr 2017 12:44

Short answer - Like Mike said, get an EI distributor and you'll be fine. CD ignition amps like an MSD 6-series are not necessary.

User avatar
bertvorgon
Supporter
Posts: 9777
Joined: 04 Aug 2003 20:45
Location: White Rock, B.C. Canada

Re: Distributor Choice with MSD 6AL

Postby bertvorgon » 09 Apr 2017 12:55

I can testify that the Dizzy works just fine, mine has been in service for 34 years now, never missed a beat and has propelled my engine, under 16 PSI boost, to 8,000 RPM no problem.
"Racing makes heroin addiction look like a vague wish for something salty" - Peter Egan

1973 2Door Slalom/hill climb/road race / canyon carver /Giant Killer 510
1968 Vintage 3HP Mini Bike
1971 Vintage 13' BOLER trailer

loungin112
Posts: 163
Joined: 05 Mar 2014 21:34
Location: Colorado

Re: Distributor Choice with MSD 6AL

Postby loungin112 » 09 Apr 2017 15:45

MSD5 works well too...oh hey...I think I saw one in the classified section!

hehe


Return to “Powertrain”



Who is online

Users browsing this forum: No registered users and 2 guests