datrod wrote:For the folks that might need a set of side axles I have them stock. I have 6 pair in stock. $300.00 per set plus shipping. World wide shipping.
There are a couple other sources for these axles. But they all have copied my design. I started making these back in about 2007.
You can contact me thru facebook or e mail. facebook John Williams.
e mail wmi73@verizon.net
Thank you.
John, thank so much for posting.
Are these stub axles specifically for the CLSD R180 or can they work with the Torsen diff as well?
Also, what material are your stub a Les made from?
Thanks for signing up and posting.
Byron
Love people and use things,
because the opposite never works.
datrod wrote:For the folks that might need a set of side axles I have them stock. I have 6 pair in stock. $300.00 per set plus shipping. World wide shipping.
There are a couple other sources for these axles. But they all have copied my design. I started making these back in about 2007.
You can contact me thru facebook or e mail. facebook John Williams.
e mail wmi73@verizon.net
Thank you.
John, thank so much for posting.
Are these stub axles specifically for the CLSD R180 or can they work with the Torsen diff as well?
Also, what material are your stub a Les made from?
Thanks for signing up and posting.
Byron
I can answer one of those questions for you. In my previous post with the photo of Johns stub axel I stated Im running a 2014 STI Torsen LSD
1970 2 door sr20det cookie cutter build
My build thread
http://www.the510realm.com/viewtopic.php?f=3&t=30772
Nor Cal Meng !
They are only for a Subaru STI diff which is 27 spline. I got a set and there great, I also got the "D" bolts for these that press into the back side from Riley Curtis at Lynchburg Nissan. I put them in my freezer overnight then installed them. Simple tapping with a hammer and they were in like Flint.
"Lastnight the wife said oh boy when your dead you can't take nothing with you but your soul oh "Think"
- John Lennon
Three B's Racing wrote:They are only for a Subaru STI diff which is 27 spline. I got a set and there great, I also got the "D" bolts for these that press into the back side from Riley Curtis at Lynchburg Nissan. I put them in my freezer overnight then installed them. Simple tapping with a hammer and they were in like Flint.
any idea where I can get these pressed in stubs Lou?