The 510 Realm

I have read that most people use the 240 throttle cable. I ordered one and installed it but it is really short. it works fine for testing right now but I would like to find something longer. Any ideas? I believe the one I have is about 32" See Picture.

That is what I used, I have not had any issues with mine thus far with multiple track days on it.

I would just like to route it behind the engine block for a cleaner look and so its not so tight. The car is still being pieced together but I would like to find a good cable. I know there are universal ones so I may have to go with that.

I get what you mean. If you find a solution update this thread so I can follow up.

will do! finally making good progress on the car

I used a locar cable and cut it to fit

Really getting momentum on the 510 again. been long over due. trying to get everything cleaned up... and then bodywork one day. I am running all connections through the firewall using some old military banjo connectors. makes a nice, clean, waterproof fit. I can disconnect and reconnect if needed and there is only one way to connect it so no worries about a short or mistake.

Hey All so I ended up buying a throttle cable for an eclipse. I Really like the clean look of it (makes a nice 90* turn after the firewall). I had to cut off 12"~ off the end. I then took a 3/8-24 x 2" bolt and cut the head off. I bored a .25" hole 1.75" deep and a 1/8 hole through the rest.

Probably too late now but the S13 KA24E throttle cable is a bunch shorter than the S13 KA24DE cable.

Nice job on the custom cable!

I only tried a sr20 one and didn't like its fit... my overall goal is to keep the car as clean as possible and this seemed to do the trick

Nice work. Any pics with it installed? What year eclipse?

I measured it up, I just havent installed it (when I have free time its too hot... aka lazy me)

The cable was from ATP part number Y1154. Should fit Eclipse's from 1990-1995

The cable will be way to long if you dont trim it down though