Page 1 of 1

Sway bar for Front sump KA24DE

Posted: 02 May 2018 17:32
by ajen68510
Im looking for anyone that has done a sway bar on a front sump KA. tried the Futofab sway bar .............no it did not fit, its for sale if anyone needs it. Let me know if anyone has something or knows what might fit.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 05:29
by Three B's Racing
I don't know why it wouldn't fit as other KA users have used it with no issues. See Project Builds, Finn's KA24DET.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 07:49
by ajen68510
I dunno, rear sump maybe. Even Futofab says it may not fit all applications. Just know it does not fit.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 11:13
by eastbaysolo_73
This guy makes them in LA and there's a few people using his sway bar. There's no write ups on them so I can't give you any details. But I know A few people on FB that used it and didn't post anything negative about it. You can contact him and see if there's any issues with fitment. I know my when I tried and mocked up my Futofab sway bar for my KA swap at the time it barley fit. It was hitting the cross member. I couldn't fully install it because the drivers side holes where striped where you mount it to the frame. Something I still have to fix. Good luck its worth a try.

https://losangeles.craigslist.org/sgv/p ... 35946.html

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 14:13
by ajen68510
Thanks, i will check it out.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 14:51
by RONSLYCHUK
Hey Andrew, have you tried Speciality? When I got my KA put in they supplied one for me.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 15:38
by ajen68510
No not yet. His are custom made. Car is not mobile yet. Its currently at Noel's shop. But thats probably what i will need to do when i get it on road.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 16:08
by RMS
keep in mind that the sway bar can collide with the tc rod if not fully thought through. a custom bar bent up at a local spring shop is cheap.... but it takes a lot of planing.

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 16:15
by ajen68510
RMS wrote:
03 May 2018 16:08
keep in mind that the sway bar can collide with the tc rod if not fully thought through. a custom bar bent up at a local spring shop is cheap.... but it takes a lot of planing.
Thats why i would have Andy at Specialty bent up a custom one if i cant find an existing. He would have to have the car though

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 17:13
by RMS
a tow from squamish to delta could be cheaper than shipping a bar across the border lol

Re: Sway bar for Front sump KA24DE

Posted: 03 May 2018 17:20
by ajen68510
Nope ! Had one shipped from FUTOFAB......................way cheaper.Besides i will wait till its running