1968-9 ignition

[dodgydan]

does anyone have a 68-69 ignition switch pin out diagram? I have a cut 68 harness (no plug) and I do not have an early style ign. switch to pin out myself. I will prob. install one of my later ign. switches but I believe these are pinned differently. we installed the later style steering column in my sons car so the later style switch will be easiest to install.
thanks.
harness wires:
BLACK: 12v supply?
BLACK with yellow stripe:
(2)BLACK with white stripe:
BLUE with red band:

[okayfine]

A version of a '68 diagram:
https://drive.google.com/folderview?id= ... E0MGY3NTA1

I have a '69 diagram in the garage I can get to if the above doesn't help.

[dodgydan]

thanks. I did look at those, and also traced my wiring. what im looking for is the pin out of the early style ignition switch,
ie: what terminal is connected to what. in each of the key positions.
like this but for the early switch with correct wire colours.

Ignition%20switch.jpg (76.48 KiB) Viewed 1839 times

[two_68_510s]

68 datsun wiring switches.JPG (185.76 KiB) Viewed 1829 times

color code.JPG (13.12 KiB) Viewed 1828 times

[dodgydan]

thanks. what source is that 1968 wiring diagram from? its diff'. to all the others I have. is it specific to an auto/wagon/jdm spec? ignition wiring looks the same except for the R/W is BLK at ign. switch on our car.
thanks again.

[two_68_510s]

thanks. what source is that 1968 wiring diagram from? its diff'. to all the others I have. is it specific to an auto/wagon/jdm spec? ignition wiring looks the same except for the R/W is BLK at ign. switch on our car.
thanks again.

A version of a '68 diagram:
https://drive.google.com/folderview?id= ... E0MGY3NTA1

I have a '69 diagram in the garage I can get to if the above doesn't help.

Right here in your very own thread, I just blew it up a bit. Originally from UK Haynes:

Haynes 058.jpg (642.36 KiB) Viewed 1813 times