LED dash lights

Paint, body preparation and modification, interior work and electrical
User avatar
SteveEdmonton
Supporter
Posts: 407
Joined: 27 Aug 2010 13:20
Location: Edmonton, AB

Re: LED dash lights

Postby SteveEdmonton » 30 Jan 2017 17:05

So the fix turned out to be pretty simple once I had a good look at the situation and spent 10 minutes in the Canadian Tire plumbing section.
IMG_8731 comp.jpg
IMG_8731 comp.jpg (189.55 KiB) Viewed 155 times

These fittings-- 99 cents apiece, and as it turns out I really only needed 1-- are absolutely the perfect size. They're 3/4 x 1 inch adapter pieces for working with poly pipe. And their dimensions are absolutely perfect for this purpose: inner diameter 15mm, outer diameter 22mm.

First step: I cut two sections from the smaller side of the adapter. Each is 8mm long, which is just enough to prevent the front end of the LED bulb from touching the arc of the dome, while still allowing the bottom section of the radial LED emitters (if that's the word) to shine within the dome itself.
IMG_8733 comp.jpg
IMG_8733 comp.jpg (246.16 KiB) Viewed 155 times

I used JB Weld to glue these little "extension tubes" onto the back of the tach, on top of the clear plastic domes. I did this with the tach out of the instrument cluster so I could see what I was doing.
IMG_8738 comp.jpg
IMG_8738 comp.jpg (232.04 KiB) Viewed 155 times

Here it is re-assembled.
IMG_8741 comp.jpg
IMG_8741 comp.jpg (222.64 KiB) Viewed 155 times

The bulbs look like this, mounted in the standard tach lighting harness....
IMG_8730 comp.jpg
IMG_8730 comp.jpg (157.2 KiB) Viewed 155 times

It's hard to see, but here they are, inserted into the end of the new plastic extensions. They fit perfectly-- just a little bit of pressure, and the socket "pops" into the end of the pipe.
IMG_8747 comp.jpg
IMG_8747 comp.jpg (183.86 KiB) Viewed 155 times

Assembled, installed, and powered up, here's how it looks.
IMG_8753 comp.jpg
IMG_8753 comp.jpg (196.97 KiB) Viewed 155 times

As you can see, the tach lighting isn't quite the same colour as the other instrumentation lighting. Both types are sold as "warm white," but the colour temperature of the wedge-mount bulbs (used for most of the instruments) is 3000K while the bayonet-base tach lights are 2700K. I really didn't notice the difference while looking at the lights in the car. Maybe I was just too relieved to have them all working? Anyway, you can certainly see the difference here in these photos.

Best part of all: no hammer needed (thanks, Keith)! :o
Last edited by SteveEdmonton on 30 Jan 2017 17:50, edited 1 time in total.
'71 4-door
'74 MGB-GT
'04 Miata

RONSLYCHUK
Supporter
Posts: 447
Joined: 12 Sep 2004 19:42
Location: Abbotsford B.C.

Re: LED dash lights

Postby RONSLYCHUK » 30 Jan 2017 17:18

Nice job Steve. I will be retrofitting mine shortly. Good job on the Canadian Tire stuff.

User avatar
Byron510
Moderator
Posts: 11625
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

Re: LED dash lights

Postby Byron510 » 30 Jan 2017 17:25

Sometimes the "fix" in concept is worth more than the actual job.

Nice work, and certainly a step in the right direction.

It's been years since I've had a late dash. But my 69 coupe dashboard sure could use some light. To be honest, I have no idea what bulbs styles are actually in that one. The 68 dash in Ole Blue however uses the same bayonet style as your dash does.

Modification noted :-)

Byron
Love people and use things,
because the opposite never works.


Return to “Body & Electrical”



Who is online

Users browsing this forum: No registered users and 1 guest