350Z seats in a 4 door 510?
-
- Posts: 29
- Joined: 01 Mar 2017 21:52
- Location: Calgary, Alberta, Canada
350Z seats in a 4 door 510?
Has anyone seen this done before? Pictures would be great!!! I have found a pair of seats that I think might work, but they are a couple hours away...
David Wilson
67.5 SRL311 #00050
67.5 SRL311 #544
68 SPL/SRL311 Racecar project
69 SRL311
69 SRL311
71 510 Sedan - L20B w/SU's and 280ZX 5 spd
72 510 Sedan - L18 w/Webers and Dogleg 5 spd
74 260Z - L26 w/ Triple Webers and 280ZX 5 spd
89 Toyota HiAce
67.5 SRL311 #00050
67.5 SRL311 #544
68 SPL/SRL311 Racecar project
69 SRL311
69 SRL311
71 510 Sedan - L20B w/SU's and 280ZX 5 spd
72 510 Sedan - L18 w/Webers and Dogleg 5 spd
74 260Z - L26 w/ Triple Webers and 280ZX 5 spd
89 Toyota HiAce
Re: 350Z seats in a 4 door 510?
Never been done. Installation costs are astronomical. Totally out of character with a nice little 510.. Butterscotch clashes with dark green anyway. Where did you say you found them?
- PoorMtnKid
- Supporter
- Posts: 1219
- Joined: 28 Aug 2010 14:43
- Location: Las Vegas NV
Re: 350Z seats in a 4 door 510?
I have them installed in my 2 door. They are obviously going to be bigger than stock seats. I really cannot give much on the install because I already remove the factory mouting location before these went in from previous seats. THe only down side to the 350z seats is that thedriver seat inner rear mounting ( If I remeber correctly ) is higher than the other 3. Prob a terrible way to explain it lol. But basically the 1 of the 4 bolt holes is not the same elevation as the other 3.
I can get pics if you want later tonight.
I can get pics if you want later tonight.
looking for pass. side arm rest
-
- Posts: 29
- Joined: 01 Mar 2017 21:52
- Location: Calgary, Alberta, Canada
Re: 350Z seats in a 4 door 510?
Jim - your ulterior motives are showing through...
Thanks PoorMtnKid. I found some pics that look like the fit nicely. I figured there would be a little goofing around to get it to work... but has ro be better than existing!
Thanks PoorMtnKid. I found some pics that look like the fit nicely. I figured there would be a little goofing around to get it to work... but has ro be better than existing!
David Wilson
67.5 SRL311 #00050
67.5 SRL311 #544
68 SPL/SRL311 Racecar project
69 SRL311
69 SRL311
71 510 Sedan - L20B w/SU's and 280ZX 5 spd
72 510 Sedan - L18 w/Webers and Dogleg 5 spd
74 260Z - L26 w/ Triple Webers and 280ZX 5 spd
89 Toyota HiAce
67.5 SRL311 #00050
67.5 SRL311 #544
68 SPL/SRL311 Racecar project
69 SRL311
69 SRL311
71 510 Sedan - L20B w/SU's and 280ZX 5 spd
72 510 Sedan - L18 w/Webers and Dogleg 5 spd
74 260Z - L26 w/ Triple Webers and 280ZX 5 spd
89 Toyota HiAce
Re: 350Z seats in a 4 door 510?
I have them in my 2 door also. I really like them. As others stated if you need pics or anything I could help out.
71 PL510
92 rhd 180sx
01 s2000 aka skidmark
03 wrx winter car
92 rhd 180sx
01 s2000 aka skidmark
03 wrx winter car
-
- Posts: 29
- Joined: 01 Mar 2017 21:52
- Location: Calgary, Alberta, Canada
Re: 350Z seats in a 4 door 510?
Thanks Gumby - pics would be great. What did you need to fabricate for mounting?
David Wilson
67.5 SRL311 #00050
67.5 SRL311 #544
68 SPL/SRL311 Racecar project
69 SRL311
69 SRL311
71 510 Sedan - L20B w/SU's and 280ZX 5 spd
72 510 Sedan - L18 w/Webers and Dogleg 5 spd
74 260Z - L26 w/ Triple Webers and 280ZX 5 spd
89 Toyota HiAce
67.5 SRL311 #00050
67.5 SRL311 #544
68 SPL/SRL311 Racecar project
69 SRL311
69 SRL311
71 510 Sedan - L20B w/SU's and 280ZX 5 spd
72 510 Sedan - L18 w/Webers and Dogleg 5 spd
74 260Z - L26 w/ Triple Webers and 280ZX 5 spd
89 Toyota HiAce