Stock 240sx distributor housing

Paint, body preparation and modification, interior work and electrical
Post Reply
deano510
Posts: 184
Joined: 16 Dec 2013 18:42
Location: NorCal

Stock 240sx distributor housing

Post by deano510 » 15 Sep 2018 23:21

I have a 240sx 240 SOHC engine in my '71 510 2dr. Right now I have an "L" series Pertronix distributor but would like to use a stock 240SX distributor with stand alone electronic assembly inside. I've contacted both Pertronix & Hot-Spark but neither of them makes a kit to do this. I don't use the computer and have a pair of phh44 Mikuni carbs.

Is there anyone on the forum that has swapped in the stand alone assembly inside.
My email address is gzentas510@outlook.com.

Dean

datzenmike
Supporter
Posts: 5353
Joined: 24 May 2006 12:40
Location: Van. Isle.

Re: Stock 240sx distributor housing

Post by datzenmike » 17 Sep 2018 19:42

It's called a crank angle sensor (CAS) and needs the ECU and sensors to set the spark and correct advance. It might be useful if going to something like a Mega Jolt system.
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs

Post Reply