My S14 Kouki w/ stroked RB30

View and post your Nissan/Datsun project(s)
Post Reply
User avatar
wiring specialties
Supporter
Posts: 79
Joined: 22 Dec 2011 15:20

My S14 Kouki w/ stroked RB30

Post by wiring specialties »

Hey again everyone.


This is my personal project and my company demo car that we have been slowly building for some time. In the link is the 2010 setup when were were running a stroked RB30 to 3.1L. This past summer the block was sent out to a shop in Chicago where it has been stroked even further to 3.2L. We hope to have it back in the car early this coming year and get it out for some driving once again.

To our knowledge, there is only 1 other 3.2L RB in North America. It is an S13 out in Chicago that we wired up last year.

A few details:

3.2 L RB30
Twin HKS GTRS
740cc Nismo injectors
Aussie Rods and Wiseco Pistons
AEM

The head is an RB25 head that has been modified to accept RB26 manifolds. I really wanted to stick with cast iron reliability. I had a few manifolds crack on my SRs, till i went with a Fullrace custom unit. These came with the Turbo kit, so i am running stock manis and needed to re-drill the head. No problems and was done when the head was being worked on for the RB30 install.

Power comes on very linear and has been very reliable. On stock RB25 cams and a conservative tune I made the following:
Made 380WHP and 390 Tq at 9 lbs of boost
Made 545 WHP and 550 tq at 20 lbs on 94 octane

With aftermarket cams and a more aggressive tune for the track, should be able to make 600 whp at about 20-22 lbs psi.

View our RB powered S14 Kouki here: http://wiringspecialties.com/rbs1424.html


This is a pic from last year when the motor was still 3.1L. Will post up more pics here as we get the new block back and get back to working on the car. If you have any questions about the build or just want to comment, don't hesitate to post up.

Image
Made in USA - Engine Start Guaranteed - OEM Quality Guaranteed
Contact Us! Email: info@wiringspecialties.com Phone: 860-799-6579
Ash510
Posts: 499
Joined: 21 Jun 2004 20:31
Location: Surrey,B.C.

Re: My S14 Kouki w/ stroked RB30

Post by Ash510 »

that is a very nice looking engine, not a 510.... but still cool.

and what is the car ment for track,street, ?
User avatar
johnbureezu
Posts: 638
Joined: 07 Jun 2007 11:22
Location: Sunny Diego

Re: My S14 Kouki w/ stroked RB30

Post by johnbureezu »

Are you guys making SR to 510 harnesses yet? That would be naiiice.
http://easytunegarage.blogspot.com/
User avatar
wiring specialties
Supporter
Posts: 79
Joined: 22 Dec 2011 15:20

Re: My S14 Kouki w/ stroked RB30

Post by wiring specialties »

Ash510 wrote:that is a very nice looking engine, not a 510.... but still cool.

and what is the car ment for track,street, ?
Bit of track and a bit of street.
Made in USA - Engine Start Guaranteed - OEM Quality Guaranteed
Contact Us! Email: info@wiringspecialties.com Phone: 860-799-6579
Post Reply