Project Sacrilege: '55 Chevy with Japanese twist.

View and post your Nissan/Datsun project(s)
sycklash
Posts: 48
Joined: 30 Jun 2014 17:34
Location: Nova Scotia, Canada

Project Sacrilege: '55 Chevy with Japanese twist.

Postby sycklash » 21 Feb 2017 19:12

Well, I guess I'll start a new thread for my latest project so you guys know I'm not dead, and this is what I'm doing while I'm neglecting the Datsuns(I also picked up a '72 1200 :P)
Ever since I've been little, I've been growing up around 55-57 chevys, and a '55 has always been my dream car. A little while ago, I ended up buying a four door belair and planned on restoring it. While all my panels that were necessary were on backorder, I found a 2 door for sale that cost less than what I was ordering for panels, so I cancelled the order and brought the 2door home!

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


Buying the 2 door saved me so much work(was going to replace basically everything on the four door on top of converting it to a two door).
This shell already had new floors, new trunkpan, tailpan, quarters, inner-quarters, rocker panels + inner rockers replaced. It's just been sitting around for a while so it had a bit of surface rust.
What I've been doing since I've gotten it is just stripping it down to bare metal, and repairing sketchy repairs done in the past. I'm currently getting the firewall, A-pillars + dash ready for a coat of epoxy.

So my friends went up to Quebec a bit ago for the sole purpose of hitting up JDM shops to bring back parts. They ended bringing me back my motor for my car. (which came with a bit of cosmetic damage, along with a busted motor mount ;D)

Image

Image

Image
Gotta ditch that twin set-up!, I'm going with a massive single.

Image

Image


That's right. This is going to be a 2JZ swap. I just figured I'd throw it in there to see how well it fits, and honestly it fits better than I thought.
I need to modify the front crossmember a bit, build a couple motor mounts, and modify the firewall, but that's all in the name of fun!
I need to pick up a transmission right away too. I'm thinking about going with the CD009 350z 6-speed. It's too hard to find a T56, or R154 around where I live.

The other week I got a little bit of free time and I ended up taking the frame out from under the car, as it's going to be replaced with the frame from under my 4-door.
I'm trying to set up the rotisserie my father managed to pick up, to work for the car. It's originally off a chevelle. The front won't be so bad but the back is going to be troublesome.

Image

Image

I ended up getting bored tonight and cut out the firewall. I figured I misawell get all that metalwork done before I epoxy everything.
I ended up not having cardboard so I gave up for the night as I couldn't even make any templates haha.

The plan for the car is essentially for it to look like this.(modelkits not finished in this pic haha)

Image

It's going Roulette green, with white two-tone.


The biggest things I need to get on the go right now, is figuring out rear suspension(I'm really debating on doing an IRS set-up, but unsure of what to base it from.possibly a MK4 Supra or C4 Corvette??), order a transmission so I can mockup the motor+trans with the suspension when it's done, and get a rollcage on the go.
The body is not going to be a problem as it's what I do for a living, but it's going to be sooo time-consuming...
It's really early in the game, but you gotta try and get what you can figured out as early on as possible.


Here's another picture from before I tore down the four-door + got it blasted/sealed, with my fathers '55 and my 510!

Image
Instagram: @Sycklash

RONSLYCHUK
Supporter
Posts: 429
Joined: 12 Sep 2004 19:42
Location: Abbotsford B.C.

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby RONSLYCHUK » 21 Feb 2017 19:30

Verrrrry interesting! That 55 looks really good. I like what you are doing there. Can't wait to see the finished product.

User avatar
McShagger510
Posts: 1706
Joined: 26 Mar 2004 20:55
Location: East Van, Canada

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby McShagger510 » 21 Feb 2017 22:00

I personally LOVE unusual combinations like this. Won't be making any friends in the purist camps at car shows.

STOKED!! :mrgreen: :mrgreen:

James

kjv7kip.jpg
kjv7kip.jpg (64.21 KiB) Viewed 211 times
Nothing ventured, nothing grained! - Benjamin Franklin

'72 2dr. 510 Turbo
'73 240Z all stock
'71 2dr. 510 stock......for now
'91 Nissan truck
'78 Kawasaki Z1-R
'84 Kawasaki GPZ750 Turbo
'99 Kawasaki ZRX1100

User avatar
Heinrich
Posts: 71
Joined: 11 Jan 2013 03:37

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby Heinrich » 21 Feb 2017 23:38

i like this "marriage" between Japanese and american very much.

loved the look of the chevy's but never liked american V8's.
Progress is slow, but it is progress non the less.

User avatar
Byron510
Moderator
Posts: 11453
Joined: 01 Jul 2003 23:06
Location: Maple Ridge, BC

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby Byron510 » 22 Feb 2017 09:11

The J2Z has a seriously good reputation, and I have seen it installed in a lot of American iron including first gen Mustangs, Chevy II's and Chrysler products of the 60's and 70's. I love it! Like James said, you won't make friends. But you can really keep them scratching their heads by removing anything that says Toyota off the motor, or really throw them for a loop and put a bow tie emblem on the valve cover....

My fathers Datsun powered chopped and channeled 32 is still coming along as well...

Great to see you posting again, keep up the photo reports - love it!

Byron
Love people and use things,
because the opposite never works.

User avatar
510wizard
Supporter
Posts: 980
Joined: 12 Sep 2005 09:50
Location: Reno, Nevada

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby 510wizard » 22 Feb 2017 09:25

What did you pay for the 55, if you don't mind me asking? I have a 56 station wagon that was my Grandfather's, that been in storage for 50 years, that I am going to sell this summer.

sycklash
Posts: 48
Joined: 30 Jun 2014 17:34
Location: Nova Scotia, Canada

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby sycklash » 08 Mar 2017 10:28

Thanks guys for the kind words! It's nice to hear some kind words :P, most people aren't too fond of it as you can imagine hahaha.
and 510wizard, I picked up the absolutely bare shell for 6500, which is actually a pretty good price for around here whereas it has brand new(still e-coated) panels on the inside.

So I managed to get a little bit of work done in the past little while. It isn't much, but I'm trying to force myself out more since I know I'll be away with the military again from april - Sept ish. My main goal before that is epoxy it so I don't have to worry while I'm gone making money for car parts.

I've been spending my time finishing up welding the new panels in the car, strengthening everything, and building my friggin' firewall(more of a pain than I planned on it being hahaha).

Image

The car is now part volkswagen! As that is a leftover brand new inner-wheelhouse for one we did rust repair on at work.
Still a lot of finessing to do to finish it but I think it's going to work real nicely for the 2JZ. Who would of thought it would be that much longer than a V8 :P.
Once firewall is done, it's getting coated with epoxy and then I'm moving on to the inner quarter panels. I found a template/guide online on how to mini-tub the car while having it remain looking stock so I figured I'd give that a go. Something else I've been looking into quite heavily lately is a roll-cage. Just having a hard time deciding what to go with.

I didn't take any pictures of it, but got the rest of the fill off the quarters and seen where they butchered them up to put partial panels in. It's basically pushed in about 1.5 inches on the driverside, and 1 inch on the pass side. That's going to be fun to fix :x

The frame is coming out from under the 4-door hopefully this weekend, so I'm planning on bringing it home so I can start cutting it up and modifying it as well. That'll give me a push to ordering my rear suspension asap too. Kinda need to see how it's going to sit so I can see if I need to modify my quarters a little bit. I don't want to cut out my wheel-wells, but I'm thinking about bulging them out a little bit for a bit of a "wide-body" kind of idea underneath where the stainless goes. If you're going to be pushing 6-700hp you have to make sure you're going to have a little bit of grip unfortunately.

We had some free time at work so I finally got around to fixing my original bel-air wheel!(which is now half panel-bond epoxy due to the cracks from being 61~ years old)
I think it turned out pretty nice. Little things like this get me excited to see the car in paint. Forgot to set on the chrome for the picture haha

Image

Image
Instagram: @Sycklash

User avatar
McShagger510
Posts: 1706
Joined: 26 Mar 2004 20:55
Location: East Van, Canada

Re: Project Sacrilege: '55 Chevy with Japanese twist.

Postby McShagger510 » 08 Mar 2017 23:59

Wheel came out great, nice work.

James
Nothing ventured, nothing grained! - Benjamin Franklin

'72 2dr. 510 Turbo
'73 240Z all stock
'71 2dr. 510 stock......for now
'91 Nissan truck
'78 Kawasaki Z1-R
'84 Kawasaki GPZ750 Turbo
'99 Kawasaki ZRX1100


Return to “Non PL510 Projects”



Who is online

Users browsing this forum: No registered users and 2 guests