I need help
I need help
when i take out my datsun and i give it gas it feels like its not wanting to go
it runs but i have to keep it really slow but it still changes gear
my father says its not getting enough power
at first he thought it was the clutch
I am not sure
does anyone have a clue?
it runs but i have to keep it really slow but it still changes gear
my father says its not getting enough power
at first he thought it was the clutch
I am not sure
does anyone have a clue?
Re: I need help
It sounds like it could be a timing or fuel delivery issue, do you feel/hear/smell the clutch slipping. We'll need a bit more history and detail on the car to successfully help you.
Re: I need help
OK - list of questions - answer them all and we can probably help you.
1. have you been driving car regularly - new gas etc.?
2. Is car manual or automatic?
3. Stock carb/engine?
4. Points/electronic distibutor?
5. What if anything have you messed with/replaced recently?
I agree with defdes - but some more info would help us point you in the right direction.
1. have you been driving car regularly - new gas etc.?
2. Is car manual or automatic?
3. Stock carb/engine?
4. Points/electronic distibutor?
5. What if anything have you messed with/replaced recently?
I agree with defdes - but some more info would help us point you in the right direction.
Finished is better than perfect......
- 510-Trevor
- Supporter
- Posts: 1373
- Joined: 03 Mar 2007 18:34
- Location: Calgary, Alberta
Re: I need help
If you post your location in your profile, someone local may offer to come over and help.
1972 Yellow 4dr
-
- Supporter
- Posts: 6080
- Joined: 24 May 2006 12:40
- Location: Van. Isle.
Re: I need help
If it takes off alright and drives fine at low speed but but quickly starts to jerk and stutter like you are turning the ignition off and on when you accelerate, the fuel filter may be full of dirt. They are cheap so just get one and replace it if you do not know when it was replaced last.
"Nissan 'shit the bed' when they made these, plain and simple." McShagger510 on flattop SUs
Re: I need help
I think it was the carb
my dad took out the big filter and push something in and he said that was the problem
Ill try to take it out for a little cruise today to make sure
Has anyone had that problem before?
my dad took out the big filter and push something in and he said that was the problem
Ill try to take it out for a little cruise today to make sure
Has anyone had that problem before?
Re: I need help
Not sure what you father "pushed in" to fix the filter, but yes a clogged filter would cause those symptom, and it's pretty common. Get back to us with a follow up on how it running.
Good luck/
Good luck/
Last edited by RonM on 06 Sep 2011 16:25, edited 1 time in total.
Sometimes people loose touch with subjectivity, because they've got they're heads stuck too far up they're own,,, Reality.
- two_68_510s
- Supporter
- Posts: 3894
- Joined: 18 Apr 2010 11:20
- Location: Ben Lomond California
Re: I need help
Must have been the choke, it may have been sticky.
Joel
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
Re: I need help
A few pics - would really clear things up. Hope you got it fixed.dat5102dr wrote:I think it was the carb
my dad took out the big filter and push something in and he said that was the problem
Ill try to take it out for a little cruise today to make sure
Has anyone had that problem before?
Finished is better than perfect......
Re: I need help
That was the problem
The Carb had something sticking out (under the filter)
Does anyone know what causes that?
The Carb had something sticking out (under the filter)
Does anyone know what causes that?
- two_68_510s
- Supporter
- Posts: 3894
- Joined: 18 Apr 2010 11:20
- Location: Ben Lomond California
Re: I need help
Can you be a little more specific?
What was the problem?
Sometimes the threads are not in order, and you need to reference your responses
What was sticking out, and what happened to it?
What was the problem?
Sometimes the threads are not in order, and you need to reference your responses
What was sticking out, and what happened to it?
Joel
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
2 '68 510 2 door sedans
'95 240SX
“We will either find a way, or make one.” – Hannibal
Re: I need help
I was two cylinder looking tubes that are there in the card
i pushed them in and it clicked
Before when i drove the car
i gave it gas it would sort of bounce
my dad said it was not getting enough strength
It ran and it changed gears but it would not go fast
Does anyone know what causes that?
i pushed them in and it clicked
Before when i drove the car
i gave it gas it would sort of bounce
my dad said it was not getting enough strength
It ran and it changed gears but it would not go fast
Does anyone know what causes that?
- 510-Trevor
- Supporter
- Posts: 1373
- Joined: 03 Mar 2007 18:34
- Location: Calgary, Alberta
Re: I need help
IMO, at this point, your inability to communicate using automotive terminology tells me that you are in over your head. If you really want some help and are not just some troll seeing how far he can take this, post some pics of the parts you are trying to describe. Answer the questions we are asking and post your location and ask if there is somebody nearby that can help you. Next, go buy one of the recomended repair manuals.
1972 Yellow 4dr
Re: I need help
I agree - not getting much back at this point that is useable, much less legible. Picture is worth 1,000 words, probably 10,000 in this case.
Finished is better than perfect......
-
- Posts: 3685
- Joined: 24 Mar 2004 07:01
Re: I need help
Though my writting was bad.
What I can make out hes talking SUs
Best to sell the car or learn L motors really fast. There simple motors
olddatsuns.com
What I can make out hes talking SUs
Best to sell the car or learn L motors really fast. There simple motors
olddatsuns.com